Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,073
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 9
  • Total: 9

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Recommended barrels....

Started by GB2017, July 10, 2020, 03:49:26 PM

Previous topic - Next topic

GB2017

Ok one of the first (of many) noob questions in my quest for knowledge.....

Sooo what are the common barrels employed when re-barrelling Rapids ie changing their calibre and then after what is common what are deemed to be the really good barrels out of that selection, specifically I am looking at 177

thanks

KCE

Hi Geoff.
It is well known that rapid barrels can be pellet fussy you will find out in time.
If you are wanting new then I would suggest looking at https://www.silco.co.uk/barrel-blanks-17-c.asp
These have stood the test of time.
I was very fortunate 2 years ago when I bought a 19inch screw cut 22 of ebay for my project.
It has stood the test of time and this year I will upload a video of a rabbit shot at 200yds with my fac rapid with that barrel.
The length also comes into account when building your project 16inch is the most common but I would always go for screw cut for suppressor over than slip on.
Regards Kev.
Like Like x 1 View List
Regards KCE
Admin.

nevadacowboy

Sorry to hijack this post but I am also interested in this.  Is it better to go for a choked or unchoked barrel.
Bob
Once a Sapper always a Sapper

KCE

It depends on person to person and what they want to achieve from there out fit.
there are pros and cons on both of them.
I like chocked barrels but I know of a new project that was built not to long ago I was there for that build at KevG and that was a un chocked polygon barrel in .25 doing 60ft.
I'm sure there will be more members who will also give you both advice on this matter.
Regards kev.
Regards KCE
Admin.

GB2017

Quote from: KCE on July 10, 2020, 03:56:04 PM
Hi Geoff.
It is well known that rapid barrels can be pellet fussy you will find out in time.
If you are wanting new then I would suggest looking at https://www.silco.co.uk/barrel-blanks-17-c.asp
These have stood the test of time.
I was very fortunate 2 years ago when I bought a 19inch screw cut 22 of ebay for my project.
It has stood the test of time and this year I will upload a video of a rabbit shot at 200yds with my fac rapid with that barrel.
The length also comes into account when building your project 16inch is the most common but I would always go for screw cut for suppressor over than slip on.
Regards Kev.

Hi Kev

Interesting that the Silco are Weihrauchs I must admit that I have sort of anticipated LW / Anschutzs being recommended.

Must admit my preference would be screw cut rather than slip on, have that with my s410 royal pita if you ask me

When I get my gun it will be sub 12 177.

@Nevadacowboy no need to apologise sir, perfectly acceptable question and as we are going to get here eventually what about the polygonal barrels too just to complicate stuff further

GB2017

Quote from: KCE on July 10, 2020, 04:21:56 PM
It depends on person to person and what they want to achieve from there out fit.
there are pros and cons on both of them.
I like chocked barrels but I know of a new project that was built not to long ago I was there for that build at KevG and that was a un chocked polygon barrel in .25 doing 60ft.
I'm sure there will be more members who will also give you both advice on this matter.
Regards kev.

So what are the positives / negatives of choked vs unchoked barrels?

Get as technical as you like just sort of aim at a retarded zombie marmoset language wise and you might just hit it ;-)

KCE

Air Arms have also just introduced a new type of barrel they call stx.
most Theoben rapids came with a loather walther barrel chocked and some came with the anni barrels which are hard to find.
Some members use the BSA barrels also on there rapids.
Regards kev.
Regards KCE
Admin.

KCE

This may help you.
Regards kev.
Regards KCE
Admin.

KCE

I'm sure that at sub 12 chocked barrels will work much better.
Unchoked at times can work better but only at FAC.
Regards kev.
Regards KCE
Admin.

GB2017

Quote from: KCE on July 10, 2020, 04:35:15 PM
This may help you.
Regards kev.

Helps a lot many thanks Sir!!!

Ca_Varminter

Quote from: GB2017 on July 10, 2020, 04:29:18 PM

So what are the positives / negatives of choked vs unchoked barrels?

That is an Age old Question......
I run my Titanium Rapid @60+ fpe
LW Polygonal barrel unchoked..

The purpose of the choke was to make that barrel less pellet fussy..
Well it seems to do the opposite if you have a Very Tight Choke...
Also it seems to affect the larger Cal. more...
But that is my Personal experience...
You ask a room full of airgunners...You will have a broad spectrum of opinions!!

Stuart

KevG

done loads of silco barrels and all have been great apart from one.i like unchoked my self.but each to their own..you can get good and bad in all the brands.
KevG
Regards KevG.
Administrator

Squinty

I've had two unchoked LWs on my FAC ,  both of them have been pellet fussy.
The original LW was massively over choked and I've simply gone from one end of the scale to the other. Hard lead 5.50s to struggling with finding consistent batches of 5.53s.

I put a 177 HW100 factory finished barrel on my sub12 mk2, seems to be fairly good.
Bought that from SWS and Kev trimmed it, shaved a whisker off the breech end and ported it.
The Euro exchange rate was better and it cost £109 posted for a full length blued and screw-cut barrel.

I've got another HW100 tube in 22 for Kev to fettle when he's not so busy.
This one stands me at £122 but it's still cheaper than another LW blank.

GB2017

Well this has been a real eye opener, I had expected to be deluged with recommendations for LW / Annie. I had a LW in my Leshiy and did like them, so that's given me cause to pause and recontemplate

daystatesniper

The thing is Annie barrels are usually great so owners keep them ,and when they do come up for sale they can fetch the kind of prices that would bail a third world country out of debt !!

atvb' Mick

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.