Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,073
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 22
  • Total: 22

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Recommended barrels....

Started by GB2017, July 10, 2020, 03:49:26 PM

Previous topic - Next topic

GB2017

Quote from: daystatesniper on July 12, 2020, 07:33:40 AM
The thing is Annie barrels are usually great so owners keep them ,and when they do come up for sale they can fetch the kind of prices that would bail a third world country out of debt !!

atvb' Mick

so is it a specific annie barrel or any?

KevG

the problem with some of the anschutz barrells is they can be over choked.its theoben who did the choking.
KevG
Regards KevG.
Administrator

Squinty

Another one to throw in the equation  BSA, but at 15.5mm they need the breech end sleeving.
They were very good and 15 odd years ago considered the THE replacement / upgrade for a fussy TB barrel.
Believe Chambers still have some  177 blanks, but tbh...BSA went through a period of shockingly s**** production and QC.

From what I've gleaned some HW barrels were actually made by LW with a faster twist rate, also springer and PCP barrels also had different twists... depending on the application.

Also the option of a CZ barrel, believe the AA S200  more machining work but expensive and RFD delivery only




KevG

I have one of the old BSA barrels Steve m8 in .22.had for around 25 years now.its been on 4 different rapids.would never part with it.this one is unchoked.when I first got it I roded a pellet through and was a bit gutted as it felt so slopy and loose and pellet just ploped out of the barrel.i realy thought I had a bad one.but this thing is a tack driver.
KevG
Regards KevG.
Administrator

Squinty

#19
My father put one on the FAC Rapid, 2005-6ish plus a long AWT mod but for reasons unknown that came barrel off and was replaced with the original uber-choke LW.


GB2017

is it safe for me to assume that we are talking about 16mm diameter silco / weihrauch barrels?

KevG

Regards KevG.
Administrator

GB2017

thanks will get ordering

next daft question what needs to be done to the barrel when I get it as I know it isnt going to be wack it with a club hammer and its fitted lol

rgc_swanseaARC

I am on my third barrel on my TTR.

The original 19 inch one was just pointless so i got rid.
I replaced with another unknown rapid original barrel and it shot well but only with bis mags / baracuda match.
The third one i had custom made by Impact Airguns at the time when they were still going.  14 inch, LW barrel in the white.
They cut it, ported, hand crimped a bit at a time tested and then finally added the screwcut.  I told them i wanted it to shoot Exact Express and they engineered it to do so.  It is unbelievable!
I also tried a HW barrel blank and had this machined to fit, but it turned out that the bore was all over the place and not concentric so this was again binned.

If it were me, i would be looking at either an unchoked LW and have it engineered to fit, or second to that a 16mm CZ barrel from an AA MPR or S200, these can also be incredibly accurate.

Nick had great success with an old Falcon barrel but this would need to be sleeved to make it fit, but again seemed very accurate.

Regards,
Rhys
Theoben TTR1 .177, Steven B Blue/Grey Laminate Stock, Nutshot Mod, Hawke Sidewinder 10x42 Tac IR
Daystate Pulsar. 177, Donny FL Sumo Mod, Pard NV008LRF

GB2017

Quote from: rgc_swanseaARC on July 17, 2020, 10:30:16 AM
I am on my third barrel on my TTR.

The original 19 inch one was just pointless so i got rid.
I replaced with another unknown rapid original barrel and it shot well but only with bis mags / baracuda match.
The third one i had custom made by Impact Airguns at the time when they were still going.  14 inch, LW barrel in the white.
They cut it, ported, hand crimped a bit at a time tested and then finally added the screwcut.  I told them i wanted it to shoot Exact Express and they engineered it to do so.  It is unbelievable!
I also tried a HW barrel blank and had this machined to fit, but it turned out that the bore was all over the place and not concentric so this was again binned.

If it were me, i would be looking at either an unchoked LW and have it engineered to fit, or second to that a 16mm CZ barrel from an AA MPR or S200, these can also be incredibly accurate.

Nick had great success with an old Falcon barrel but this would need to be sleeved to make it fit, but again seemed very accurate.

Regards,
Rhys

Thanks Rhys, interesting read

I need to get a .20 barrel and i am not sure whether cz make these for the s200, don't think so but will have to look, so probably leaves me with the lw / silco offering

GB2017

out of curiosity, anyone ever tried a leshiy barrel?

I know from experience they are very accurate lw barrels, probably would need sleeving to fit

just a thought.....

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.