Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 6
  • Total: 6
  • Baidu

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

A new stable mate

Started by telbert, August 29, 2022, 03:32:46 PM

Previous topic - Next topic

KevG

no I could do a reg set to pressure for your gun,but with a reg and 21.4 grn pellets you would be better running around 840 fps.you would need to adjust hammer pre load spring tension to suite the reg.if I was you I would use the gun first and see how it goes before spending money on it m8
KevG
Like Like x 1 View List
Regards KevG.
Administrator

angrybear

Quote from: telbert on August 30, 2022, 12:45:50 PM
Quote from: angrybear on August 30, 2022, 11:26:13 AM
Quote from: telbert on August 30, 2022, 10:14:59 AM
So, the info i now have :  a reciept from Pax Guns dated 2011 for tuning to 40 ftlbs is in with the paperwork.I've taken the bottle and stock and it has 6 no holes in the bottle adapter and definitely no hole in the side of the adapter. It was doing 36ftlbs yesterday but now its down to 7/8 ftlbs.


Thanks for the reply angrybear.

6 holes in the bottle push pin is a "fast flow" same as I've got on my .25 FAC,
If it was me I'd be looking to turn it down a fair bit to get a lighter pellet, running around 900fps and get more shots per fill, but that's just a personal preference.
Yes i want consistency & accuracy over power

A leaking bottle doesn't really mater while it's fitted to the rifle but not good if it's your spare, fixing it means taking the valve off the bottle to change the seal, make sure the bottle is vented first.
Agreed in the short term but i will need to change the seal eventually. Can i just remove the valve by hand once its completely empty? Do you know if there are any vids on youtube that cover this?


There should be no need for the PTFE tape on the bottles, the O ring is what seals it, you do know to "burp" the bottle (dry fire) as you remove it don't you ?
Yeah, i've been burping it while removing.Tbh  the ptfe is on there for filling .I cant find my best fitting connector but had an old spare one laying about but it doesn't create a perfect seal.

Also with a fast flow, does this simply allow more air into the valve to increase power unregulated? Ifso i'm guessing the power would drop as the air in the bottle decreases until empty?

How tight the bottle valve is depends if it's ever been off before & if/how much, thread-lock has been used,
they don't just fall out, but with the bottle in a vice (with soft jaws) a ring spanner on the valve, a quick whack should shift it, always has with mine.

Someone will correct me if wrong,
but a fast flow allows air from the bottle in to the prechamber faster (as per the name) so the pressure doesn't drop, over the time a shot takes,
this means the balance between exhaust valve, barrel port & hammer strike, control the efficiency, limiting wasted air behind the pellet & the power curve.
A FF barrel has a smaller port than a regulated barrel to limit the air flow at max pressure in order to reduce the power curve as the bottle pressure drops.

A regulator limits the max pressure in the pre-chamber by shutting the bottle off so every shot has the same pressure,  the barrel port can be opened to speed airflow,
& the valve better tuned to the hammer strike because it doesn't have to cope with varying pressures, so it's more efficient.
Like Like x 1 View List

telbert

Quote from: angrybear on August 30, 2022, 10:56:40 PM
Quote from: telbert on August 30, 2022, 12:45:50 PM
Quote from: angrybear on August 30, 2022, 11:26:13 AM
Quote from: telbert on August 30, 2022, 10:14:59 AM
So, the info i now have :  a reciept from Pax Guns dated 2011 for tuning to 40 ftlbs is in with the paperwork.I've taken the bottle and stock and it has 6 no holes in the bottle adapter and definitely no hole in the side of the adapter. It was doing 36ftlbs yesterday but now its down to 7/8 ftlbs.


Thanks for the reply angrybear.

6 holes in the bottle push pin is a "fast flow" same as I've got on my .25 FAC,
If it was me I'd be looking to turn it down a fair bit to get a lighter pellet, running around 900fps and get more shots per fill, but that's just a personal preference.
Yes i want consistency & accuracy over power

A leaking bottle doesn't really mater while it's fitted to the rifle but not good if it's your spare, fixing it means taking the valve off the bottle to change the seal, make sure the bottle is vented first.
Agreed in the short term but i will need to change the seal eventually. Can i just remove the valve by hand once its completely empty? Do you know if there are any vids on youtube that cover this?


There should be no need for the PTFE tape on the bottles, the O ring is what seals it, you do know to "burp" the bottle (dry fire) as you remove it don't you ?
Yeah, i've been burping it while removing.Tbh  the ptfe is on there for filling .I cant find my best fitting connector but had an old spare one laying about but it doesn't create a perfect seal.

Also with a fast flow, does this simply allow more air into the valve to increase power unregulated? Ifso i'm guessing the power would drop as the air in the bottle decreases until empty?

How tight the bottle valve is depends if it's ever been off before & if/how much, thread-lock has been used,
they don't just fall out, but with the bottle in a vice (with soft jaws) a ring spanner on the valve, a quick whack should shift it, always has with mine.

Someone will correct me if wrong,
but a fast flow allows air from the bottle in to the prechamber faster (as per the name) so the pressure doesn't drop, over the time a shot takes,
this means the balance between exhaust valve, barrel port & hammer strike, control the efficiency, limiting wasted air behind the pellet & the power curve.
A FF barrel has a smaller port than a regulated barrel to limit the air flow at max pressure in order to reduce the power curve as the bottle pressure drops.

A regulator limits the max pressure in the pre-chamber by shutting the bottle off so every shot has the same pressure,  the barrel port can be opened to speed airflow,
& the valve better tuned to the hammer strike because it doesn't have to cope with varying pressures, so it's more efficient.

Thanks for all this info angrybear.

telbert

Quote from: KevG on August 30, 2022, 08:25:25 PM
no I could do a reg set to pressure for your gun,but with a reg and 21.4 grn pellets you would be better running around 840 fps.you would need to adjust hammer pre load spring tension to suite the reg.if I was you I would use the gun first and see how it goes before spending money on it m8
KevG
Thanks Kev, yeah i'll need to get out with the rifle a few times first to see how its behaving before i decide the next move.

Kevgun

Telbert, is this the one I pointed out to you from Wales

telbert

Quote from: Kevgun on September 01, 2022, 09:23:37 AM
Telbert, is this the one I pointed out to you from Wales
No this one came from your neck of the woods Kev.
I actually drove past Doncaster on the way home.

Kevgun

Wrong KevG, Im in Basingstoke ;D
Like Like x 2 View List

KevG

one of us needs to change our name kev m8😁
Like Like x 1 Funny Funny x 1 View List
Regards KevG.
Administrator


This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.