Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 7
  • Total: 7
  • Baidu

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

A new stable mate

Started by telbert, August 29, 2022, 03:32:46 PM

Previous topic - Next topic

telbert

Hi all, i picked this FAC Mk 2 Rapid up this morning and im well chuffed with it.  Ive dated it to 2001 and i think it has the Anschutz trigger. Its running at around 40 ftlbs and its doing sub 10 mm groups, albeit at only 10 metres. Its been standing unused for quite some time so now i'm looking for someone to give it a service before i take it out, any recommendations please?




Like Like x 1 View List

KCE

Hi telbert.
That looks very nice and clean with an early mod fitted.
Im sure if your this side of the pond KevG can help you out.

Regards Kev.
Like Like x 1 View List
Regards KCE
Admin.

Ca_Varminter

Nice Trigger..sought by many as the Near Match Trigger....
I would go with KCE Recommendation..KevG
The Rapid's Best Friend!!

Good Luck with her.. It sound it is shooting Good.
Just needs it's O-rings check if it hasn't service for a Long Time!

Cheers M8,
Stuart
Like Like x 2 View List

telbert

Quote from: Ca_Varminter on August 29, 2022, 07:02:38 PM
Nice Trigger..sought by many as the Near Match Trigger....
I would go with KCE Recommendation..KevG
The Rapid's Best Friend!!

Good Luck with her.. It sound it is shooting Good.
Just needs it's O-rings check if it hasn't service for a Long Time!

Cheers M8,
Stuart

Last time it was serviced was in 2011 when it was FAC tuned by PAX Guns. :o




telbert

So, is this likely to have a fast flow fitted rather than a reg? If so Would one of Kev G's reg's improve the performance?

Ca_Varminter

Quote from: telbert on August 29, 2022, 07:13:05 PM
So, is this likely to have a fast flow fitted rather than a reg? If so Would one of Kev G's reg's improve the performance?
It all depends on what the Power level was turned up to!!
If was below 40fpe... it still could be regged..

Just take a look at the bottle adapter that screws into the Receiver!
If it has a small hole on the side near the receiver, then it Does have a Reg!


Good Luck,
Stuart

KevG

have you actually seen it on chrono doing 40 ftlbs, thats alot if on the standard length  fac 19 inch barrel, even on a fast flow.you have to be careful with the anschutz triggers and very high hammer load as the sears can snap.
KevG
Winner Winner x 1 View List
Regards KevG.
Administrator

Ca_Varminter

Quote from: KevG on August 29, 2022, 09:34:39 PM
have you actually seen it on chrono doing 40 ftlbs, thats alot if on the standard length  fac 19 inch barrel, even on a fast flow.you have to be careful with the anschutz triggers and very high hammer load as the sears can snap.
KevG
This Why KevG is the RapidMan!!!!
Good Catch!

Stuart
Like Like x 1 View List

telbert

So, the info i now have :  a reciept from Pax Guns dated 2011 for tuning to 40 ftlbs is in with the paperwork.I've taken the bottle and stock and it has 6 no holes in the bottle adapter and definitely no hole in the side of the adapter. It was doing 36ftlbs yesterday but now its down to 7/8 ftlbs.

telbert

Quote from: telbert on August 30, 2022, 10:14:59 AM
So, the info i now have :  a reciept from Pax Guns dated 2011 for tuning to 40 ftlbs is in with the paperwork.I've taken the bottle and stock and it has 6 no holes in the bottle adapter and definitely no hole in the side of the adapter. It was doing 36ftlbs yesterday but now its down to 7/8 ftlbs.
Leaky bottle!!
just refilled the bottle and dropped it in a bucket of water and its got a leak, did the same to another bottle and its got an even smaller leak so  ill need some info on fixing these too please, ill get some pics up shortly.
The rifle is now doing 39/40 ftlbs as shown

telbert

These are the 2 bottles that are leaking.The first pick has the slowest leak, didnt even notice it while i was using it,the second pick is the worst leak.

angrybear

#11
Quote from: telbert on August 30, 2022, 10:14:59 AM
So, the info i now have :  a reciept from Pax Guns dated 2011 for tuning to 40 ftlbs is in with the paperwork.I've taken the bottle and stock and it has 6 no holes in the bottle adapter and definitely no hole in the side of the adapter. It was doing 36ftlbs yesterday but now its down to 7/8 ftlbs.

6 holes in the bottle push pin is a "fast flow" same as I've got on my .25 FAC,
If it was me I'd be looking to turn it down a fair bit to get a lighter pellet, running around 900fps and get more shots per fill, but that's just a personal preference.

A leaking bottle doesn't really mater while it's fitted to the rifle but not good if it's your spare, fixing it means taking the valve off the bottle to change the seal, make sure the bottle is vented first.
There should be no need for the PTFE tape on the bottles, the O ring is what seals it, you do know to "burp" the bottle (dry fire) as you remove it don't you ?

telbert

Quote from: angrybear on August 30, 2022, 11:26:13 AM
Quote from: telbert on August 30, 2022, 10:14:59 AM
So, the info i now have :  a reciept from Pax Guns dated 2011 for tuning to 40 ftlbs is in with the paperwork.I've taken the bottle and stock and it has 6 no holes in the bottle adapter and definitely no hole in the side of the adapter. It was doing 36ftlbs yesterday but now its down to 7/8 ftlbs.


Thanks for the reply angrybear.

6 holes in the bottle push pin is a "fast flow" same as I've got on my .25 FAC,
If it was me I'd be looking to turn it down a fair bit to get a lighter pellet, running around 900fps and get more shots per fill, but that's just a personal preference.
Yes i want consistency & accuracy over power

A leaking bottle doesn't really mater while it's fitted to the rifle but not good if it's your spare, fixing it means taking the valve off the bottle to change the seal, make sure the bottle is vented first.
Agreed in the short term but i will need to change the seal eventually. Can i just remove the valve by hand once its completely empty? Do you know if there are any vids on youtube that cover this?


There should be no need for the PTFE tape on the bottles, the O ring is what seals it, you do know to "burp" the bottle (dry fire) as you remove it don't you ?
Yeah, i've been burping it while removing.Tbh  the ptfe is on there for filling .I cant find my best fitting connector but had an old spare one laying about but it doesn't create a perfect seal.

Also with a fast flow, does this simply allow more air into the valve to increase power unregulated? Ifso i'm guessing the power would drop as the air in the bottle decreases until empty?

KevG

depends how its been turned and set up  by rights from a full fill you should get a power curve,for example first shots around 900 climbing as bottle pressure drops to around 920 then back down to 900.if it just starts high then drops the gun is being thrashed and waisting air.if power as dropped that much you must have a leak somewhere
KevG
Like Like x 1 View List
Regards KevG.
Administrator

telbert

Quote from: KevG on August 30, 2022, 05:47:37 PM
depends how its been turned and set up  by rights from a full fill you should get a power curve,for example first shots around 900 climbing as bottle pressure drops to around 920 then back down to 900.if it just starts high then drops the gun is being thrashed and waisting air.if power as dropped that much you must have a leak somewhere
KevG
So if i wanted to fit one of youre regs can the block be posted out to you for fitting/ setting up  or could i fit it myself if i bought from you?  Also whats the cost for this please?

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.