Block Rebuild & Appropriate Lubrication

[GB2017]

Morning All

going to be building a mk2 block over the weekend and was wondering what the best / recommended lubricants that I should be using

thanks in advance

[KevG]

personaly I don't use any.apart from a bit of moly on the orings.maybe a very slight smear of light grease on bolt body.hammer should run dry but well worth a polish if its tarnished.
KevG

[KCE]

As Kevg said build up dry.
Regards kev.

[GB2017]

personaly I don't use any.apart from a bit of moly on the orings.maybe a very slight smear of light grease on bolt body.hammer should run dry but well worth a polish if its tarnished.
KevG

Well if its good enough for you Sir, for the rest of us mere mortals.....

thanks Sir

PS so after I have completely poggered it, I will be calling about a tune 

[Ca_Varminter]

Moly>>>>> MolyKote 33
Low Temp Silicone grease
medium or thin grade

Stuart

[KCE]

I can put some in a packet and send for free if you need some m8.
Regards kev.

[GB2017]

I can put some in a packet and send for free if you need some m8.
Regards kev.

that is mighty kind of you Sir, I have some thanks, I just needed to check as while I dont mind asking noob questions, but posting something along the lines of I have seized the guts of my rapid as I squirted some expanding foam to stop shot resonance might prove embarrassing and open myself to ridicule