Anschutz match trigger

[Tacker]

I've done a search and read a thread about some Anschutz triggers fitted to Rapids without the safety catch.
Someone mentioned seeing a Rapid on g'trader without safety which I think I noticed.
Does any one know if the safety catch can be removed (not cut off) or does it have to be a trigger designed for no safety catch?
I'm considering a new stock for the range for my Anschutz Rapid.
I know that the block sits forward like a MK1 but it would be great not to have to notch a new stock.

[Brooksy]

The safety catch can be removed in about two minutes. Pop the E clip off and simply pull it off the pin. The spring will come off with the tension cam, again, another E clip.

[Tacker]

Excellent.

[Brooksy]

If you have any doubts, send it to me. The locating pins may need to be removed to make the fitting a bit narrower.

[Tacker]

Thanks mate

[Brooksy]

1. Remove these three E clips and the safety catch, roller and spring will detach from the trigger unit.
2. Replace the rear E clip after the roller and spring have been removed.