Mk1 mfr build

[Daztilley]

Had an early mk1 .22 block and a 12" .22 barrel with bucket boy shroud ...... thought it would be an idea for a mk1 / mfr build......
Using a MFR stock and a mk1 kevg mfr type regulator. It all went together very easily and set the reg at 100 bar as the barrel is quite short.

Pard 008 fitted on a Dr Bob weaver rail and zb Pro mount

[KevG]

very nice Daz.looks a handy tool.
KevG

[Daztilley]

It's really good being a carbine length Kev - might be getting a touch of hammer bounce ...... may be in touch for a double tap to sort that out 👍

Was firing it at the range and all you could hear is the hammer hitting the valve - then the smack of pellet hitting the spinner 😃

[KevG]

may need reg turning up slightly with it being a shorter barrel Daz.
KevG

[Daztilley]

Yep was thinking that kev , so set it at 100 bar as its .22 . Just trying to get a sharp blast on firing without using too much hammer spring.

[saddler1980]

lovely little one that is Daz

[Kernal]

Nice how you`ve done that Daz sometime even i miss the normal look of a pre-charge.

[The Robin]

Looking good Daz