For The Rapid Newbie... How to Load your Rapid Mag!

[Ca_Varminter]

Here is a quick tutorial on how to load your Rapid Mag.
there is a PDF at the bottom...






________________________
https://photos.imageevent.com/scl_electronics/gun/air/fil%20mag.pdf

BTW...if you find yourself in need to refill the mag that is not completely Empty..
YOU DO NOT NEED TO EMPTY IT BEFORE REFILLING IT..
Just rotate the cover like you were going to fill normally, insert that first pellet to hold the star in place..
Now just spin the cover over the next empty slot , repeat until full!!!

Stuart

[KCE]

Thank you Stuart for that easy to read and see info on that subject.
That tip at the end is the first time I heard that so I will do that from now on.

[Ca_Varminter]

That tip at the end is the first time I heard that so I will do that from now on.

Hey KCE,
You Are One Of Them?!?!?!?


Stuart

[ColinH]

Thank you Stuart for that easy to read and see info on that subject.
That tip at the end is the first time I heard that so I will do that from now on.

Here is a quick tutorial on how to load your Rapid Mag.
there is a PDF at the bottom...






________________________
https://photos.imageevent.com/scl_electronics/gun/air/fil%20mag.pdf

BTW...if you find yourself in need to refill the mag that is not completely Empty..
YOU DO NOT NEED TO EMPTY IT BEFORE REFILLING IT..
Just rotate the cover like you were going to fill normally, insert that first pellet to hold the star in place..
Now just spin the cover over the next empty slot , repeat until full!!!

Stuart

Thanks as well Stuart.
So is there a proper "unloading procedure", if you only say shoot 4 of the full 12 loaded, and would it do any harm if you left the magazine with these 8 inside for extended periods of time ?

Thanks, C/

[Ca_Varminter]

Thanks as well Stuart.
So is there a proper "unloading procedure", if you only say shoot 4 of the full 12 loaded, and would it do any harm if you left the magazine with these 8 inside for extended periods of time ?

Thanks, C/

Just as easy.....
Just spin the lid in the direction of the arrow.
As you start taking up tension on the indexing start..
The pellet that was next to be shot will fall through the opening in the back of the Mag!
Just rotate the indexing and drop the rest of pellets through the opening in the Back!

Since the spring is not in a  lot of tension....it shouldn't harm the spring.....

Good shooting,
Stuart

[ColinH]

Thanks as well Stuart.
So is there a proper "unloading procedure", if you only say shoot 4 of the full 12 loaded, and would it do any harm if you left the magazine with these 8 inside for extended periods of time ?

Thanks, C/

Just as easy.....
Just spin the lid in the direction of the arrow.
As you start taking up tension on the indexing start..
The pellet that was next to be shot will fall through the opening in the back of the Mag!
Just rotate the indexing and drop the rest of pellets through the opening in the Back!

Since the spring is not in a  lot of tension....it shouldn't harm the spring.....

Good shooting,
Stuart

👍