Looking for two of these

[Kernal]

If anyone know`s where i can buy these it would be a great help getting my old Hf Radio back up and running again,

Pics in attachments,

[Ca_Varminter]

Well if can't scavenge from another donor unit....
How Good are at Soldering?
You can cut up the original Flat Cable into a couple of junction units...
On each end you will strip and tin them...
On end will go in the flat cable connector on the board or device....
Then using standard Ribbon cable( the conductors are standard wire) solder the wires to the other end of the Flat cable!!
Not Pretty... But it will work....
I've made a couple in a pinch....

Good Luck Kernal!!!!


Stuart