Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 8
  • Total: 8
  • Baidu

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

What makes a MFR a MFR?

Started by Tim_B, March 25, 2021, 06:59:57 AM

Previous topic - Next topic

Tim_B

So learnt something about the scalloped block - that's for that Kev.

In reality then the only difference for the later ones will be the reg.

KevG

yes reg but its the same reg just with a different push pin disc.
KevG
Like Like x 1 View List
Regards KevG.
Administrator

Dave74

#32
Quote from: daystatesniper on March 28, 2021, 09:16:28 AM
Tim the T2 had a shrouded barrel like a MFR ,that's it !


atvb' Mick
You just answered the question to the thread !an mfr has a shrouded barrel,and that's my opinion to ,it should have been mfr1 if they were meant to have standard barrels and mfr2 if they were shrouded ,I've never seen an mfr advert with a standard barrel, there wouldn't be a ttr1 and 2 or is everyone saying a ttr1 is just a ttr 2 without shroud and a ttr2 is a ttr with a shroud🤔
Fit like n !!!

Aggy

How long are the barrels ,mine is 12 " sitting inside a bucketboy shroud,its actually about 2 " shorter than the 280 cc cylinder
Raw HM1000x fac .22
Skout Epoch .25 fac
Beretta 680

Ruger m77 mk2 .223
Many many many others been and gone

KevG

should be a shade under 16 inch as standard.
KevG
Regards KevG.
Administrator

Aggy

Unsure why it would have been made so short but it works very well
Raw HM1000x fac .22
Skout Epoch .25 fac
Beretta 680

Ruger m77 mk2 .223
Many many many others been and gone

Tim_B

I don't think it would have been made that way, it would have been shortened I reckon.

Aggy

When I go down the chassis route a supper compact shroud will be in order ,do you know anyone with a raw with a supper short barrel and shroud ?
Raw HM1000x fac .22
Skout Epoch .25 fac
Beretta 680

Ruger m77 mk2 .223
Many many many others been and gone

Tim_B

#38
Yep. 8).   Mine  8). Pic below is with a 200cc bottle.  If I use an original 280cc bottle then it's level with the end of the barrel - two different looks.

I have just picked up a slightly longer barrel so I can get the same look either with the 200cc or 280cc bottle.

The downside is it's quite air hungry, so I'm in the process of setting up to balance power v air usage

Like Like x 1 View List

Aggy

#39
Love that gun ,I know they look Uber cool but I won't be having a folder would probably run a gen 1 prs stock heavier than the ctr but adjustable for lop and cp height .
How long is your barrel Tim.
Like Like x 1 View List
Raw HM1000x fac .22
Skout Epoch .25 fac
Beretta 680

Ruger m77 mk2 .223
Many many many others been and gone

Tim_B

I think from memory the barrel is 10.5 inches - the shroud is circa 13 end to end (but I'd need to check that)

I don't think you would want to go shorter  :D.   But you could

KevG

shortest I done was 8 inches. accuracy was still spot on.in fact it improved slightly. of course shot count suffered.
KevG
Regards KevG.
Administrator

Tim_B

That's a short barre Kev - how did you go about balancing the air usage?  SSG or a different way?   Higher reg pressures/stronger spring etc?

Daztilley

One of kevs double tap inertia setups would help - stops hammer bounce and gives the same results as an SSG but does it in a different way 👍
Like Like x 1 View List
Regards Daztilley
Moderator

KevG

on that individual gun did nothing else as it was down to the owner what they wanted doing.but normally would fit DTI and set reg to suit.you can get decent shot count on short barrel smaller air capacity.got a .20 cal on 11.5 inch barrel and 200 cc bottle and that does around 220 shots per charge.
KevG
Like Like x 1 View List
Regards KevG.
Administrator

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.