Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 13
  • Total: 13
  • Baidu (3)

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Theoben Rapid Adjustable Valve..

Started by Kernal, December 15, 2020, 09:43:29 PM

Previous topic - Next topic

Kernal

Theoben Rapid Adjustable Valve..
Stainless steel .
Cap included as in picture.
You can still fit 26mm shroud with this valve.
This give a better tune between hammer and valve timing.saving the need to sorce different valve springs .

Anyone know what this is all about i found it listed on ebay for £65 pounds.


KevG

can not realy see the point in them my self.as long as you have a decent stem spring fitted gun should run fine.nothing wrong with the standard theoben spring though I do them 1.5 mm longer.which tends to flatten the power curve slightly better on un reged guns.
KevG
Regards KevG.
Administrator

Kernal

So on the early Mrk1`s if you fitted a stronger or a decent stem spring it would or could flatten that horrible power curve it has,....if so by how much as when i had my mrk1 unregged it was or had a horrible power curve.
If i remember the power curve could go from 11lbs to say 15 lbs at peek,...That was until i got you to fit your regulator :D i never even give the power curve a thought after your reg tbh.

:D

KevG

no thats different in your guns case.it did not help matters because of longer barrel and to large a port which magnified the power curve. a normal curve should start at around 11 ftlbs and climb to around 11.7 ftlbs
KevG
Regards KevG.
Administrator

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.