Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 7
  • Total: 7
  • Baidu

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Powder coating my barrel

Started by Kernal, November 17, 2020, 08:05:15 PM

Previous topic - Next topic

Kernal

Okay here we have it, pictures attached.
;)

Kernal

So tomorrow i`ll fit the carbon tube to my barrel , So is it to be wax to protect my barrel or oil when i fit the carbon tube.

After its fitted i`ll take photo`s to show the gun with the Carbon tube fitted and also the DrBob buddy bottle clamp fitted to see how it looks and the clearance we have but i do think i`m going to have to lose my buddy bottle camo cover though!

:)

dyker2010

if the bluing is ok why powder coat it etc ,, i thought it was bare steel or damaged bluing i covered a lw bare steel one with carbon tube made delrin ends  on tube not much delrin left to go in tube to center it, waxed barrel slide it on still a gap between  barrel and bottle. barrel is still ok for corrosion .plugged and glued carbon tube with delrin then bored and finished on lathe

Kernal

Quote from: dyker2010 on November 19, 2020, 11:25:04 PM
if the bluing is ok why powder coat it etc ,, i thought it was bare steel or damaged bluing i covered a lw bare steel one with carbon tube made delrin ends  on tube not much delrin left to go in tube to center it, waxed barrel slide it on still a gap between  barrel and bottle. barrel is still ok for corrosion .plugged and glued carbon tube with delrin then bored and finished on lathe

All i wanted is to make it more durable in wet weather, or damp conditions,...So i don`t need to keep worring about cleaning the barrel or leaving it over long periods wondering if it`s started to rust.

So i was thinking of powder coating my barrel so its got more protection against wet weather or in bad conditions or damp conditions.

:)

dyker2010

 I see, well the carbon tube idea does work and if you ever come to sell it still got a standard blued barrel underneath.some have put an oring either end of the tube to seal it

Kernal

#20
Here's a picture showing the carbon tube fitted.

Also here's photos of the buddy bottle clamp fitted to complete the job.

;)

Kernal


This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.