Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Pellet tumbling thru air

Started by Dazgrif36, August 30, 2020, 06:10:42 PM

Previous topic - Next topic

Dazgrif36

I've noticed through scope I get odd pellets starting to spiral through air like  tumbling not flying straight  then get few that fly strait anyone no what causes this
S type .177 kevg reg 😎

Topsparx1

Bad pellets, damaged skirt on pellet, clipping if you're using a mod' can be any of the above I guess
BASC Airgun Member - Responsible Shooter 🏴󠁧󠁢󠁥󠁮󠁧󠁿
Theoben Rapid 7 Mk1 .22
Weihrauch HW100KT .22
Weihrauch HW98  .177
Walther LGM-1 .177

Dazgrif36

I've checked pellets they seem fine  no damaged  skirts it started  happening with  jsb heavys so I switched back to accupells and these seem ok at minute  unless the barrel likes thicker skirts and lighter faster pellet than slow one it is 19inch barrel  too  and it doesn't look like it's got crown either its s type barrel anshutz I believe
S type .177 kevg reg 😎

Daztilley

Stick on a pic of the crown mate 👍
Regards Daztilley
Moderator

KevG

it as a crown daz.its how theoben did them.
KevG
Regards KevG.
Administrator

Dazgrif36

Thought It would kev but cant tell on this I'll get pic of it
S type .177 kevg reg 😎

Dazgrif36

S type .177 kevg reg 😎

Squinty

#7
possible causes

Probably has a tight choke if it prefers Accupel to JSB, they are made from a harder lead alloy which doesn't deform as easily.
My old FAC barrel would only shoot the harder leads, everything else was mangled by the choke.

S£%!  batch of JSBs; their method of altering the skirt to compensate for small dies and adjust BC can upset the balance.
Worst was a batch of AADF-H which tumbled and literally fell out of the air at 45-50yds like running into an invisible wall.

Can't really tell if the crown is sharp in the pics but if that ring isn't from a grub screw ....its an over compessed choke

Dazgrif36

Yes I can see that ring it has got very tight choke  when I rod pellet down  it stops then got to give it good push to get out  I'm thinking to take choke off and recrown  who does it .
S type .177 kevg reg 😎

bob4026

Recent reports of Hades pellets 'misbehaving' at the end of travel, are you using this type?

Has the rifle been performing well, or has it always done this?

atb

Bob
2006 vintage Mk2 .177

Squinty

#10
Quote from: Dazgrif36 on August 31, 2020, 08:49:06 AM
Yes I can see that ring it has got very tight choke  when I rod pellet down  it stops then got to give it good push to get out  I'm thinking to take choke off and recrown  who does it .


m old barrel was 5.39mm in the grooves and there was a difference in o/d of the choked section.
Should have been 15.75 +/- but was 15.5
Had problems with the mod clipping because it was 0.2mm smaller at the crown and the mod could be bumped out of line.


Dazgrif36

Yes I'm having the choke removed now and crowned see how it goes  then
S type .177 kevg reg 😎

KevG

the choke was not that tight daz.if you remember when I roded the air arms through they popped out easy and very light rifling marks on the pellet.
KevG
Regards KevG.
Administrator

KevG

have you tryed singal loading as some of the mags can be over tensioned and damage the fragile .177 skirts.i had to de tension  all my .177 mags.
KevG
Regards KevG.
Administrator

Dazgrif36

It is with like hn accupells  it should be better with no choke surely less pellet fussy  hopefully
S type .177 kevg reg 😎

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.