U tube vid

[Dazgrif36]

Give this watch on how to fill rapid bottle up lol dont think  hes never had rapid before lol watch this ha tell me if I'm wrong .

[Kernal]

Well i`ve never done it like that,...I`ve always unscrew the bottle until it became tight you can normally feel it when its ready to pop,..then shot the gun off about hmm 5 to 10 times and the bottle just comes off without and popping or mass of air coming from the chamber,

Don`t know about you guys but thats how i`ve always done it tbh,

[Kernal]

Well i`ve never done it like that,...I`ve always unscrew the bottle until it became tight you can normally feel it when its ready to pop,..then shot the gun off about hmm 5 to 10 times and the bottle just comes off without and popping or mass of air coming from the chamber,

Don`t know about you guys but thats how i`ve always done it tbh,

Sorry but i didn`t watch that video till the end,...is he losing air on filling LMAO,

[Mickyd]

Must be always getting his bottle filled 😊. Md

[Dazgrif36]

Yeah his orings aren't going to last long doing like that and when he was filling bottle it was ant sealing up against his bottle half of air coming out  probally not got  the seal that goes inbetween .

[Ca_Varminter]

I think his fill adapter is one that uses a Delrin or Nylon sealing piece that seat inside of the adapter..
Here is what am talking about...


Of course he is missing it..
When he is screwing his bottle onto the tank adapter, is is just smashing the O-ring!!

Stuart

[Kernal]

Sounds about right to me Stuart!

[Kernal]

It gets better




LMAO

[Kernal]

Why does he need so many things to charge his buddy bottle up lol,....I just put my bottle to my divers bottle without anything else and charge and thats about it,

[Topsparx1]

As he said he has lots of different manufacturers connectors and that system works for him. I only have a rapid 7 and also just screw my bottle into the DIN connector, each to his own situation

[Ca_Varminter]

I guess am just as bad as the that second guy with all that stuff on his tank!!


I have a High Pressure regulator I use to fill my guns or bottles.....
I has a microbore hose with a Foster's QD end.
I use a dead-head plug to set the Reg's pressure.


So I can just crack open the valve, for a slow fill, and go do something else.
The Regulator will ensure I will not Over-fill my gun/bottle...

So I also have a few adapters to fill my guns.....

Here is the standard Rapid bottle fill adapter


Here is the one I use to fill my QF equipped Rapids


Another one that is not pictured, the one for my Steyr LP50

Of course I can connect it directly to my Ul_Ti_Mate Rapid.
For exrended testing session..



What can I day...

Stuart

[Dazgrif36]

When u shooting are u filling at the same time slowly or u have to wait

[Ca_Varminter]

Since I have the reg on my tank, I can set the working pressure.
So It constantly maintains the pressure in my Rapid, shot after shot...

Stuart

[Dazgrif36]

That sounds awesome so u set it at say 230 bar so it will stay at 232 constantly  while shooting cool

[KevG]

my god.now I know why ime so busy fixing them.
KevG