Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Cocking Lever

Started by Topsparx1, August 17, 2020, 09:15:30 AM

Previous topic - Next topic

Topsparx1

Can anyone tell me if the original Rapid 7 cocking bolt lever is made of hardened steel the same as the bolt itself ? I want to modify it but if its hardened I'll have to replace it instead.
BASC Airgun Member - Responsible Shooter 🏴󠁧󠁢󠁥󠁮󠁧󠁿
Theoben Rapid 7 Mk1 .22
Weihrauch HW100KT .22
Weihrauch HW98  .177
Walther LGM-1 .177

Topsparx1

OK no takers on that one, how about this one, does anyone know the thread size of the cocking bolt handle where it screws into the cocking bolt ??
BASC Airgun Member - Responsible Shooter 🏴󠁧󠁢󠁥󠁮󠁧󠁿
Theoben Rapid 7 Mk1 .22
Weihrauch HW100KT .22
Weihrauch HW98  .177
Walther LGM-1 .177

Kernal

Best wait for KevG m8, He`ll answer that for you or Stuart maybe,  They`ll be on later!


Ca_Varminter

Yes I do believe they were case harden after Machining.
Just looking at the ones I have..  they show very little wear....
You Might want to wait for KevG to chime in!!

Stuart

KevG

yes like bell metal.
KevG
Regards KevG.
Administrator

Topsparx1

Ok so it cant be modified 😏 any idea of the thread size into the cocking bolt ??
BASC Airgun Member - Responsible Shooter 🏴󠁧󠁢󠁥󠁮󠁧󠁿
Theoben Rapid 7 Mk1 .22
Weihrauch HW100KT .22
Weihrauch HW98  .177
Walther LGM-1 .177

Ca_Varminter

1/4" x 28 threads per inch

Stuart

Topsparx1

Thanks Stuart perfect 👍🏻
BASC Airgun Member - Responsible Shooter 🏴󠁧󠁢󠁥󠁮󠁧󠁿
Theoben Rapid 7 Mk1 .22
Weihrauch HW100KT .22
Weihrauch HW98  .177
Walther LGM-1 .177

Topsparx1

Me again, any of you lathe owning - engineering types able to make me something like the cocking lever in the pic. The guy made it from stainless steel and delrin but says he's too busy ATM to make one for me. Preferably the stainless steel could be replaced with normal steel so it can be blued as I don't want it shiny. Let me know guys this is the last piece of the jigsaw then the Mk1 R7 is complete.
BASC Airgun Member - Responsible Shooter 🏴󠁧󠁢󠁥󠁮󠁧󠁿
Theoben Rapid 7 Mk1 .22
Weihrauch HW100KT .22
Weihrauch HW98  .177
Walther LGM-1 .177

Ca_Varminter

I am a bit far away.....across the pond..
But I have made these...
Using the tactical bolt handle made for bolt action center-fire rifles..

Thew stems are Stainless and Titanium...
The knobs at hard anodized aluminum.
Am sure you can find someone close by to turn a stem out for you!

Good Luck,
Stuart

KCE

im sure Dr Bob has some new ones he has had made.
Drop him a pm im sure he can help or kevG.
Regards kev.
Regards KCE
Admin.

Topsparx1

#11
Quote from: KCE on August 20, 2020, 04:13:56 PM
im sure Dr Bob has some new ones he has had made.
Drop him a pm im sure he can help or kevG.
Regards kev.
I spoke with Bob last week, his teardrops are silver stainless steel not really what I'm after, those ones that Stuart just put up are closer but again the shiny shaft is not right for me. I am trying to make my own with a bit of black acetal, the old Mk1 bolt, araldite, a drill press and a multitude of files and emery cloth !! God help me 🤣🤣

Something like this would work, its a standard teardrop that has been cerakote finished, nice tough Matt black finish. This was for sale a few years ago on eBay popped up in an image search.

BASC Airgun Member - Responsible Shooter 🏴󠁧󠁢󠁥󠁮󠁧󠁿
Theoben Rapid 7 Mk1 .22
Weihrauch HW100KT .22
Weihrauch HW98  .177
Walther LGM-1 .177

Ca_Varminter

It is not the hard to get the stem blued..if made out of steel!!
Here is an offset bolt I made for the 10/22 rimmy I have been machining up..




I use an excellent cold bluing solution called Oxypho-Blue.
Secret to get a dark blue... Heat the part up first with a heatgun or hair-drier first!!

So get them made out maybe 4140 steel...blue it you are on your way....

Good Luck
Stuart

Topsparx1

Well I had a go and the final product in pics below, it's not the prettiest but it's comfortable and it works so as far as I'm concerned its a good result and only cost me a tenner for the plastic acetal 😃😃😃😃😃 👌🏻👌🏻👌🏻👌🏻


BASC Airgun Member - Responsible Shooter 🏴󠁧󠁢󠁥󠁮󠁧󠁿
Theoben Rapid 7 Mk1 .22
Weihrauch HW100KT .22
Weihrauch HW98  .177
Walther LGM-1 .177

KCE

That is spot on and looks the part.
And you made it with basic tools good on you.
Regards kev.
Regards KCE
Admin.

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.