Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,079
  • Total Topics: 3,204
  • Online today: 120
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Lightweight hammers

Started by Hobbyman2007, February 25, 2025, 12:14:28 AM

Previous topic - Next topic

Hobbyman2007

I don't have the weight of the stock hammer but I do know it's quite heavy compared to a lot of the rifles I've had over the years. Anyone make a lighter hammer?

Squinty

they are around 75 grams, however most other PCPs have heavier springs to go with lighter hammers.
So one issue to start with a lighter hammer would mean using a heavier spring and harder cocking.
the difference between sub-12 and 'export' is the extra force from increased hammer travel, if anything a heavier hammer and a lighter spring would be an advantage.
More gains to be nmade from airflow

Hobbyman2007

I've got a test valve working right now of the balanced variation. I was hoping there would be available source for something in my maybe half the weight. This would save me from making one.

Hobbyman2007

I'm bringing this one back from near extinction. I had first started this thread with the intention of using a light hammer in a fast flow equipped .25 FAC with a fancy valve stem that I made.it ended up using the factory hammer and shooting just a hair over 65 FPE. Fast forward to about 6 months ago when I scored a .22 fast flow model. I quickly converted it to .20 caliber using a LW blank, fitted a regulator and V fill from RAW. The final piece of the puzzle was to balance out hammer a spring set up for the 13.73 JSB's ( most accurate pellet in this rifle). I've got the regulator set to 125 bar, I made a much lighter hammer from 7075 bar stock, and using an adjustable PIP. Which now weighs in at a hair over 33 grams, so just about half the weight. At max it shoots the JSB's at 775 fps , so I made an SSG and turned it down to 750 ( give or take 3% less than max) the results are quite good, a quick snap sound and the air usage has got to be near double from the stock hammer.
Before anyone mentions the use of aluminum for the hammer, I've put close to 10 tins of pellets now through it without any wear on the hammer. When or if it does wear from the sear , I have plenty of material left and I can turn another one up in less than an hour.
Now it is slightly harder to cock the rifle but not to the point where I'm worried of breaking the cocking bolt. It's also a custom hobby I made using stainless. I'm a happy camper. Light hammers definitely make a huge difference in both the lock time and air usage even without an SSG.

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.