MFR Bottle Valve

[Walk]

OK I  have a buddy bottle fitted to my MFR it don't need a O-ring fitted it just screws on and off no problem i was given another bottle and removed the old valve. The bottle is in great condition what i want to know is were can i get  MFR Bottle adaptor to fit its a 14x 1.5 Thread Any help please ATB Phil.  

[Ca_Varminter]

Best fitting makes a MFR Compatible valve for the Standard size bottle(14mm threaading)
https://www.bestfittings.co.uk/shop/fill-probes-adaptors/buddy-bottles-valves/best-fittings-buddy-bottle-valves-theoben-mfr-valve-fitment/

Stuart

[Walk]

Will that be ok as my bottle that came with the rifle don't need the O-ring it just screws off so that bottle valve will still fit the rifle    cheers for your help ATB Phil.

[Ca_Varminter]

Well there is an O-ring.....
It is located on the depressing pin in the Reg!!

So these MFR compatible valve seal on this "Internal" O-ring!!

Also FYI... the difference between the valves is the diameter of the opening of the valve!!

The opening is larger to allow the O-ring to fit and seal.. As it open the valve!!

Stuart

[Walk]

Yes the bottle on the left is the exactly the same as the one that's fitted to my MFR the other bottle i got off my friend is fitted with a different valve its like the one on the right so i took it off so if i get the MFR one from Best fittings will it fit the rifle sorry for all the questions ATB Phil.  

[Ca_Varminter]

Well Best Fitting Claims it will....
When in Doubt Ask them!!!

Stuart

[DB.20]

There's been some info on here about the threads on some BF components; valves, reg testers, QF etc where the threads are a very tight fit when matched to Theoben components.
I've had a couple of second hand bottles where the the valve threads have been very tight for the bottle adapters. May have been BF valves on the buddy bottles???

[Walk]

Cheers Fellas i will ask see what they say ATB Phil.  

[DB.20]

Let us know how it goes Walk.

[Walk]

Let us know how it goes Walk.

Hi i have brought one to try out when it comes i will fit it and see if its ok ATB.

[Walk]

Hi Fellas i can confirm the best fittings MFR Bottle Valve dose fit and work on the MFR rifle it works a treat ATB Phil.      

[Kernal]

Hi Fellas i can confirm the best fittings MFR Bottle Valve dose fit and work on the MFR rifle it works a treat ATB Phil.      

Maybe point best fittings to this site and get them involved be a good thing!

[DB.20]

Thanks for the info Walk, nice to know that the Best Fittings MFR valve works ok.

[Walk]

I fitted valve to bottle filled the bottle to 200 bar then fitted it to rifle with no problem works fine Buddy