Just joined, looking for some advice

[Bruce]

Hi Guys,
I'm Bruce, new as a member but I have been here as a guest many times reading through posts for advice.
I have been shooting for years mainly hunting, but the last few years really getting into the maintenance side of my guns.
I'm currently dealing with a problem on my Rapid 7 fac mk.2  .22  rifle

Where or who can i ask for advice on fitting a quieter silencer than the standard, and a regulator for more consistant shots. Also a leak on the rifle and bottle. And any modifications that will be needed.

Any advice from someone who has possibly done the same would be appreciated.

[Ca_Varminter]

Hi Bruce,

Glad you joined our Group of Rapid lovers here.
The Man in the know to talk to..Is @KevG
He makes his own bits...
So He should be able to set You up with what you Need!

So if KevG doesn't show up... a very busy Rapid Doctor...
Make a post of what you need in is in the KevG Section...
https://rapidforum.co.uk/forum/index.php?board=60.0

Good Luck
Visit Us as Often as You Can

Stuart

[Bruce]

Thank you stuart ,i will wait for mr KevG,then,regards Bruce.

[P barrett]

Hi Bruce welcome to the forum,I'm sure kevG will sort you out . ATB jazz 😁

[Billgatese30]

Welcome to the forum

[Kernal]

Welcome M8 and enjoy the forum

[nevadacowboy]

Welcome aboard buddy. 

[angrybear]

Hi Bruce,
Well for the sake of a few £ I'd advise you to buy a seal kit from the bay of everything, & have a go at the leaks yourself to see how easy basic work is, "A1tackle" is the seller I use.
To find the leak I put the rifle in a bath & look for air bubbles, remove the stock, scope & mod first, & maybe tape over the muzzle, so it leaks from the breach if it's the valve.
Here's my MFR with a reg leak but also note bubbles at the bottom plug in front of the trigger, this takes a 1/4BSP Dowty washer not in the seal kits but is quite a common leak, Obviously they need a dry & relube post bath.

[Bruce]

Hi angry bear i have been away so sorry for late reply got my self a seal kit  .and found leak ,i believe the black plastic valve has some scraches on it so i have ordered a new one from Dr bob ,so waiting till it arrives,also ordered a new bottle as that was leaking as well ,so hopefully that will sort problems out,thank you again regards Bruce.

[Keiron]

Welcome to the family mate

[Kernal]

Welcome to the family mate

Is it me or does this guy have a stutter around the forum LMAO 

[Brooksy]

Welcome to the family mate

Is it me or does this guy have a stutter around the forum LMAO 

You know what I think!

[DB.20]

Lost track of it. Seemed to be welcoming himself to the forum after a bit!

[Keiron]

Welcome to the family mate

Is it me or does this guy have a stutter around the forum LMAO 

.       Hello kernel I don't really use the internet that much too buzy with life mate .. you can ask Kev about me if you need too he knows me very well mate 👍

[Keiron]

Welcome to the family mate

Is it me or does this guy have a stutter around the forum LMAO 

You know what I think!  Hello brooksy can you tell me what it is you think!! I'm a bit confused about all these comments about me