Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,073
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 8
  • Total: 8

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

New to me MK2 .25

Started by Hobbyman2007, February 14, 2025, 02:11:53 PM

Previous topic - Next topic

Hobbyman2007

New member here with a few pics of a recent acquisition. I don't have much info on this particular rifle other that what was advertised. If anyone recognizes this rifle or knows about it . Let me know.  The pics are from the add. It was posted on airgun nation and a Canadian used gun site.

Ca_Varminter

Well by the looks of it, your Rapid is one of the last to be made in the UK..
The last Version were stamped TheobenUSA, when they being produced by David Slade!
You should be able to look up the production date by Serial#


Nice looking Rapid!!
Stuart

Hobbyman2007

Thanks for sharing that sheet Stuart. From the pics the serial number is 025715. That would put it as a June 2011. I should mention is was imported to Canada in or around 2017 from Texas from what the previous owner told me.
Like Like x 1 View List

Hobbyman2007

Received the rifle today and can say that I'm quite pleased with how it looks initially. But because I'm a tinkerholic , immediately disassembled and had a good once over. The block has the fill port in the bottom plug location which I've not seen before in any pics , has the fast flow which I was expecting. The hammer and inertia assembly in great condition with zero signs of wear, however after measuring the pip length of 12mm I'm left wondering if I should do the silent pip mod now or later and maybe shorten it up to the 6 mm I've seen recommended for FAC rifles. The hammer spring setup is a twin spring affair and has about an inch of preload. This is going to get changed ASAP. After looking the innards over , I cleaned up the stock with denatured alcohol to get it ready for a few coats of true oil. I did notice the stock screw hole was a bit buggered up so I made up a quick threaded brass insert to fix it up and glued it in place. I'm its current state of tune it's shooting at about 40 fpe. Just about perfect speed for the JSB kings I have an abundance of.i don't have a trigger scale but I'm sure it's breaking at 8oz or less, no creep , short first stage and very little overtravel.

Should have acquired one of these beauties long ago, I'm really enjoying it so far.
Like Like x 2 Winner Winner x 1 View List

Daztilley

Regards Daztilley
Moderator

Kernal

Fantastic get modding it best thing i ever did to my Mrk 1   ;)
I'm an old-school programmer who started writing code back in the 1980s.

Please do not PM me unless you are an Admin or Moderator.

Hobbyman2007

Got my hammer spring affair set correctly, went with two short stiff springs and am running them with no preload on the hammer, just to say they are making contact. Put a second coat of oil on the stock then moved on to tuning. For the initial fill I started at 220 bar. This started the string at 810FPS. And ended at a peak velocity of 890FPS which was between 145 and 150 bar. Hard to say as there's no gauge and was relying on what the gauge on the tank read when the check valve opened on the next fill. Next I filled to 180 bar which started at 865FPS. Just about perfect. I can't believe how easy it is to work on this rifle.

What is everyone else using to lock the hammer spring adjuster in place?

Ca_Varminter

Quote from: Hobbyman2007 on February 19, 2025, 01:25:12 AMquote author=Hobbyman2007 link=msg=22728 date=1739928312]
What is everyone else using to lock the hammer spring adjuster in place?

If you have a problem with the hammer backing out...
A Drop of Blue Loctite should do it!
Stuart
Like Like x 1 View List

Hobbyman2007

Well as I mentioned before I'm a tinkerholic and can't leave well enough alone. Placed an order for a 580cc carbon bottle and bottle valve. And now I'm searching for a Rapid air works V block so that I can monitor fill pressure but they are sold out. Once I find it I'm going to remove the existing bottom fill port and add a pre chamber extension I've got enough material on hand to take care of that. Anyone else make V block /gauge fill ports that don't move the bottle forward it n the stock? Dr.bobs design is good but I'm not sold on the extra room it takes.
Who knows , I may end up regulating the rifle if I can find the right bits. Rapidairwerks seems like the only viable option for these parts.

Ca_Varminter

Well I had to make own QF banjo and FF adapter for my Rapid..
So if you have the tools and material.. it is not that hard....

original RAW QF with Reg and Gauge....


My custom banjo made from 7075 aluminum, and turned down FF adaptor.



Stuart

Hobbyman2007

That's some nice craftsmanship. I am using a 9 x 20 chinesium lathe that gets me by but myself or my machine are not quite capable of making what I'm looking for.

Ca_Varminter

Well I can't say I have a Ultra-Precision Lathe....
It is just a Emco Compact 5!!!!
Benchtop...I wish I have the room in my little Man Cave
But my CNC Mill take up some Room too!!



Making a Titanium Valve for one of my Rapids......

Stuart
Like Like x 1 View List

Hobbyman2007

Anyone ever add a chamber extension where the bottom plug is usually located. As you can see this rifle has a foster fill fitting but it'll be adding a RAW V block. It was my thought that the extra on hand air would help with consistency and if nothing else give me something to fill the hole with.

Squinty

Excuse my ramblings..

You haven't quite got it set up right if the power curve is a constant rise peaking at 150-155bar, either valve/ valve stem spring issues or too much preload.
Get the airflow right and you can use a single OE spring ;)

60fps extreme spread? should be able to get it down to 10-15fps (and better shot to shot).

I'm guessing the shot count is poor?
Probably getting some hammer bouce if there isn't any preload which won't help air use.

Does the buddy bottle have a valve pip or is it set up for unrestricted flow?
Such thing as too much airflow can mess with the power curve,
Sure more peak ME but can also lower optimal fill pressure perhaps 10 bar.

A 580 cc bottle will give more shots but fill pressure will be critica, overfill just gives a longer rise to the plateau. Power curve will need sorting out first.


Could probably fit a 1/4BSP digital mini guage in that hole if you need more accuracy for setting up,
I'd forgo the V-block for the sake of QF and a so-so guage and get a pre-chamber extension for a few CCs more volume.

Keep the bottom fill and make a new cover plate?

Outright volume is only really necessary for a reg, even the HMXs have limits.
Mick (Aggy) spent two years trying to screw FX slug power levels out of a .22 1000X and went back to a more reasonable 40fpe.

etiam viviens has also chases ME with his..shoots it on a tethered bottle with a reg extension?

Another option is a Huma HM1000 reg.givemore volume but needs either a blank collar or v-block.


Like Like x 1 View List

Hobbyman2007

I appreciate the reply squinty. To get rid of my ES being at 60plus fps. I've started filling to 180 bar and ending at 120 bar. This brought it down to 22 or so with a better spring set up. I'm currently shooting to keep the rifle in or around the 40 FPE mark with 25.4 gr. JSB kings. The rifle does have a factory fast flow  valve. I did notice the exhaust valve had been replaced with a single oring stem that was partially blocking off the transfer port when the valve was opening. I fixed that on the lathe by removing 2mm of material and blending it with the thin portion of the stem.
Now just because I like to complicate things, I've made a balanced valve by entending the existing valve through the rear cap using a top hat and I'm now making a lightweight hammer to match with the easy to open valve. I'll post pics of the new parts once I get everything dialled in.

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.