Scope Risers

[bob4026]

Hello everyone...

Does anyone know where i'm ikely to find some of those scope risers (the half moon types that fit inside the scope rings) for my 30mm rings please?

Many thanks

Bob

[Squinty]

Unless someone has a set they are prepared to let go you might be lucky to pick some up on Ebay.
I vaguely remeber someone 3D printing some 1"/25mm half-moons, perhaps a different forum.

[Kernal]

Now a friend of mine had some of them 3d printed and they work and look great give it a try could work for you too.

 

[Dom]

I needed some of these for some 30mm diameter mounts; I only had some for 25mm mounts. I couldn't find them anywhere, so I asked my son to take a look. He copied the design and made some up in Fusion 360 and 3D printed them. They work a treat and are currently beneath an Alpex on my MFR. what size do you need? I'm sure I can persuade my son to help you out.

[Dom]

I forgot to mention, we custom set the thickness of the risers so that the mag did not foul the underside of the scope, but the objective is still nicely close to the barrel.

[bob4026]

I needed some of these for some 30mm diameter mounts; I only had some for 25mm mounts. I couldn't find them anywhere, so I asked my son to take a look. He copied the design and made some up in Fusion 360 and 3D printed them. They work a treat and are currently beneath an Alpex on my MFR. what size do you need? I'm sure I can persuade my son to help you out.

Thanks for the generous offer, but I have ended up buying a best fittings scopr rail.

Cheers though, appreciate the offer.