New type theoben magazine

[KevG]

I have two Carm magazines which were great until last week when the O ring went very stiff. This caused the pellet skirt to catch the O ring and pull it into the hole with the pellet, effectively jamming the pellet half way through the hole into the breech. I had to take the barrel off to push it back again.
I've ordered new O rings to see how it goes. Del Darko did tell me the size when I messaged him though.

I stripped mine down a d slightly lubed the orings with moly 33.should make them last longer with a bit if luck.
kevG

[Dave74]

I managed to get one, been using it for 4/5 weeks now works perfect and will buy a couple when there available.

[kena]

Any update on the magazines gents, I'd like a couple if available

[Millingman]

I think there on ebay at the moment🤔 might be wrong thou.
https://www.ebay.co.uk/itm/195910753091?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=uAcEVgI4Q3e&sssrc=4429486&ssuid=LoHpzZqhSS-&var=&widget_ver=artemis&media=MORE

[KevG]

I think there on ebay at the moment🤔 might be wrong thou.
https://www.ebay.co.uk/itm/195910753091?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=uAcEVgI4Q3e&sssrc=4429486&ssuid=LoHpzZqhSS-&var=&widget_ver=artemis&media=MORE

your correct m8,now on Ebay
kevG

[CheshireSniper]

 Might take a punt at one of these

[KCE]

I have seen these also at KevG this week they are made very well and feel very smooth only time will tell if they stand the test of time.

Regards kev.

[Dr Fox]

SMW engineering on eBay. I have had many bits from him in the past and always good quality. He has now got Rapid mags with 16 shot capacity. Anyone tried these if not I am about to buy.

[Andycoup]

I've got a few mags by SMW, they are excellent.

[angrybear]

Where as I really don't like the SMW, the new design by "the Grid" are far superior.

[Therapidman]

Got a smw not keen on it pellets drop out ... got a 3d printed one of ebay but not the best . But the grind mags are brilliant very smooth and well made

[Millingman]

Just received mag from the Grid man, quality.👍👍👍.

[Daztilley]

Looks a good design, might have to pick 1 up. Hopefully he starts doing them in the other calibres soon

[Brooksy]

I have two Carm magazines which were great until last week when the O ring went very stiff. This caused the pellet skirt to catch the O ring and pull it into the hole with the pellet, effectively jamming the pellet half way through the hole into the breech. I had to take the barrel off to push it back again.
I've ordered new O rings to see how it goes. Del Darko did tell me the size when I messaged him though.

I stripped mine down a d slightly lubed the orings with moly 33.should make them last longer with a bit if luck.
kevG

Amendment. It wasn't the O ring. I stripped the mag down and found that the little mouldings had broken off that the O ring sits on and the ring was dropping into the pellet holes. It's scrap.

[Dr Fox]

There are no more on the bay for these. So where else are there quality mags for sale. The watchword here is build  quality!