Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 12
  • Total: 12
  • Baidu (3)

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Grouping

Started by smithy123, June 21, 2022, 10:42:17 AM

Previous topic - Next topic

smithy123

Quote from: KCE on June 21, 2022, 09:08:41 PM
Just a thought check for clipping in the end of suppressor but I have a feeling it could be the clamp giving you probs or the mag.

Regards kev.

Checked suppressor all looks fine and the magnification is the exact same as the other day everything is the same. Changing the mag only seems to effect the hold over and under, like let's say max zoom on 12 is 1 mil dot under at 20 yards, but if I got to 6 on the mag then it's half mil dot. So I think I kinda understand that but what I don't understand is how it can move 15mm to the right over night

smithy123

Quote from: angrybear on June 21, 2022, 11:01:03 PM
Quote from: smithy123 on June 21, 2022, 07:35:09 PM
Reply for angry bear,

Hi mate I've just put the mag back to how I had it in in the garden shooting at 20 yards and it's shooting 10/15mm to the right, yesterday it was shooting fine at 20 yards max mag and it's mil dot under but for some reason that has now change there no wind I'm shooting in the same position, bottle is at the same bar. It's bang on line with the target just 10/15mm to the right??


It's leaving me pickled this🤨🤨

That sounds to me like your scope's shagged,  but as Kev says it could be canting.

Starting from basics, make sure the scope is exactly vertical on top of the rifle, I find the easiest way is to rest the bottle with the rifle at arms length, eye up the block to be vertical then look up at the scope turrets,
You'll see instantly if they're off, if they are correct the fit.

To check the scope, if possible use a rest to eliminate human error, for a target you need a cross, not a dot, so that you can align the cross of the scope which eliminates any risk of canting,
If you have 2 crosses on a target sheet, on the first fire 3 shots at minimum mag tun up to max mag shoot 3 more, move to the second cross shoot max mag first then go down to min shoot again.

In an ideal world all the shots at each target cross will be in a single group & the two should look pretty much identical.
If the min & max are in 2 different groups then the ret moved with the mag change, & to me the scope's shagged.

With regard to FFP scopes, they do cost more, you aren't going to buy a 4-16x44 (or 50) FFP for under £300,
Lots of people don't like them or don't see the point, I do but it's personal choice.


Been watching a few videos on some scopes and I'm liking this type of scope and how you change the clickers depending on yardage of quarry, not just that, I like the side focus as mine now is at the front and when adjusting at night I block the it torch so I can't see if the picture is still blurry

smithy123

Quote from: KevG on June 21, 2022, 09:10:05 PM
your not canting the gun are you.
KevG

What is canting Kev mate

smithy123

Quote from: Therapidman on June 22, 2022, 03:55:39 AM
How many bar are you filling your gun to. Could have a bad power curve like one of mine has

I don't think it has anything to do with power curve mate as it's verry consistent to as to we're it's shooting it's just not on zero anymore

smithy123

Quote from: Squinty on June 22, 2022, 07:46:42 AM
If the original fault was poor accuracy.. shot gunning, inexplicable flyers then maybe the bottle clamp was touching.

But if  you're chasing adjustments and POI is changing at different ranges and magnification I'd agree with Angrybear.
My scope is a sfp so the poi does change depending on magnification, but I have figured that out

I had an Airmax 8-24x with a wandering zero, POI  changed depending on the  magnification used when it was dialed in.
Did my head in before I finally threw in the towel and bought a new scope.

Squinty

#20
Quote from: smithy123 on June 22, 2022, 10:47:36 AM
Quote from: Squinty on June 22, 2022, 07:46:42 AM
If the original fault was poor accuracy.. shot gunning, inexplicable flyers then maybe the bottle clamp was touching.

But if  you're chasing adjustments and POI is changing at different ranges and magnification I'd agree with Angrybear.
My scope is a sfp so the poi does change depending on magnification, but I have figured that out

I had an Airmax 8-24x with a wandering zero, POI  changed depending on the  magnification used when it was dialed in.
Did my head in before I finally threw in the towel and bought a new scope.

So ...you didn't know that the scale of the reticle was only true at 10x and continued to make the same 20yd adjustments  @ 3.5moa (14 clicks) per dot - but at 50yds and at 16-20-24x?
Acceptable error......over or under adjusting.

I can't get on with ranging SFP mildots and making mental adjustments , thinking in  inch/moa then converting 3.5x @ 'X' times mag @ 'Y' range.
FFP with MOA turrets and reticle every time for me now.

Still not the reason why the windage is out 4moa+ day to day from one mag to another.
Wandering zero is a fairly common Hawke fault.

BTW Are you using it with a Pard 007?
The wavelength difference between natural daylight through  a solo scope and an IR add-on can be 2-3 inches on the zero.

smithy123

Quote from: angrybear on June 21, 2022, 11:01:03 PM
Quote from: smithy123 on June 21, 2022, 07:35:09 PM
Reply for angry bear,

Hi mate I've just put the mag back to how I had it in in the garden shooting at 20 yards and it's shooting 10/15mm to the right, yesterday it was shooting fine at 20 yards max mag and it's mil dot under but for some reason that has now change there no wind I'm shooting in the same position, bottle is at the same bar. It's bang on line with the target just 10/15mm to the right??


It's leaving me pickled this🤨🤨

That sounds to me like your scope's shagged,  but as Kev says it could be canting.

Starting from basics, make sure the scope is exactly vertical on top of the rifle, I find the easiest way is to rest the bottle with the rifle at arms length, eye up the block to be vertical then look up at the scope turrets,
You'll see instantly if they're off, if they are correct the fit.

To check the scope, if possible use a rest to eliminate human error, for a target you need a cross, not a dot, so that you can align the cross of the scope which eliminates any risk of canting,
If you have 2 crosses on a target sheet, on the first fire 3 shots at minimum mag tun up to max mag shoot 3 more, move to the second cross shoot max mag first then go down to min shoot again.

In an ideal world all the shots at each target cross will be in a single group & the two should look pretty much identical.
If the min & max are in 2 different groups then the ret moved with the mag change, & to me the scope's shagged.

With regard to FFP scopes, they do cost more, you aren't going to buy a 4-16x44 (or 50) FFP for under £300,
Lots of people don't like them or don't see the point, I do but it's personal choice.



Hi mate I've just ran the test you have told me to do! I filled the 400cc alloy bottle to 240bar, on a rest so no movement. I ran the test twice and these are the results

angrybear

#22
That looks spot on Smithy, proves that the POI does NOT move if the mag changes so the scope is fine.

The other side of the coin is that it pretty much puts any error on to you, most likely it's a mix of your head position & your scope adjustment.
In reply#4 you said you're new to shooting so I'll start at the beginning with head/scope position, sorry if teaching you to suck eggs.

Close your eyes, shoulder the rifle and get in to your natural comfortable position, now open your aim eye,
If the scope is not right in front of your eye at the correct height & correct eye relief then you need to adjust it, if you have to stretch, squash or strain then you can't aim consistently.

Adjust the scope ocular (eye piece) so that the reticle is crisp & sharp to your eye, screw it all the way in, then back it out until any ghosting of the ret lines disappears.

If you have a sidewheel or AO the ranges printed on it are generalisations, adjust it to suit your eyes, so the target is crystal clear.

Hopefully once that's all done you'll have consistent accuracy.

Just noticed you say 240bar fill,  even with a reg I'd say 220bar is as high as you want, even if the bottle does say 250bar SWP.
Like Like x 1 Agree Agree x 1 View List

smithy123

Quote from: angrybear on June 22, 2022, 08:12:58 PM
That looks spot on Smithy, proves that the POI does NOT move if the mag changes so the scope is fine.

The other side of the coin is that it pretty much puts any error on to you, most likely it's a mix of your head position & your scope adjustment.
In reply#4 you said you're new to shooting so I'll start at the beginning with head/scope position, sorry if teaching you to suck eggs.

Close your eyes, shoulder the rifle and get in to your natural comfortable position, now open your aim eye,
If the scope is not right in front of your eye at the correct height & correct eye relief then you need to adjust it, if you have to stretch, squash or strain then you can't aim consistently.

Adjust the scope ocular (eye piece) so that the reticle is crisp & sharp to your eye, screw it all the way in, then back it out until any ghosting of the ret lines disappears.

If you have a sidewheel or AO the ranges printed on it are generalisations, adjust it to suit your eyes, so the target is crystal clear.

Hopefully once that's all done you'll have consistent accuracy.

Just noticed you say 240bar fill,  even with a reg I'd say 220bar is as high as you want, even if the bottle does say 250bar SWP.

I know I said I was new to shooting but I didn't mean brand new like I've been shooting for a few years just on and off but never really got deep into it until now!

I know the basics to setting the right eye relief and height and show to get the scope to zero in at let's say 25 yards in the garden. I was just confused as to how my zero could move over night.

The poi DOES change with the magnification, because the poi is 1 mil dot of hold under when zoomed in all the way, but when I take the mag down to 6 the poi is half a mil dot of hold under!!

Squinty

#24
I would say that the scope is goosed because either

a)   the windage turret isn't giving equal adjustments a varying magnification and ranges. Is the windage turret close to maximum on one side?
The single range test works at 20yds but if zeroed true would it still be cock on at 50 or vice versa?

When you get the opportunity check the tracking/return to zero.
If there is enough adjustment in the scope - wind 25 clicks right, 25 up, 25 left, 25 down...should shoot back on the same zero.


b) heat expansion -something internally the erector tube assembly tightens up due to the above, maybe uneven mountings or over tightened, Could even be a bent main tube.
one zero 'hot' in the sun, gets worse as it gets hotter. Next morning the scope has cooled down and its 15mm out.
Its 3 moa which considering the close Rapid scope mounting is roughly the equivalent of a 0.06mm shim.

c) parallax is out, lenses mis-aligned due to turret issues which is why it doesn't show until you dial in at different ranges  at a different mag.
See picture for parallax error




angrybear

#25
Quote from: smithy123 on June 22, 2022, 09:30:37 PM

I know I said I was new to shooting but I didn't mean brand new like I've been shooting for a few years just on and off but never really got deep into it until now!

I know the basics to setting the right eye relief and height and show to get the scope to zero in at let's say 25 yards in the garden. I was just confused as to how my zero could move over night.

The poi DOES change with the magnification, because the poi is 1 mil dot of hold under when zoomed in all the way, but when I take the mag down to 6 the poi is half a mil dot of hold under!!

NO, that is the holdover dot value that's changing, which is different to the reticle POI.

Because with an SFP scope the ret stays the same size when you change zoom, so at lower mag 1 dot is a higher value than at high mag because the picture behind the ret is smaller at low mag.
ie at 3x 1 dot might be a rabbits head but zoom in to 16x 1 dot is only the rabbits eye.
This is why an SFP scope has a "true" magnification, that is the only mag where the dot is actually 1 MOA at 100yds or 1 MRAD at 100M.

With an FFP scope the ret size changes with the mag so 1 dot is the same value at every mag.

Until you understand the basics of how the scope works aim with the centre cross & forget holdover  ;)

Ca_Varminter

Well I might as well throw more fuel on this fire, on this subject for FFP and SFP scopes how it works.....
The main reason for this having a 1st Focal Plane scope, The calibration of the marks on the crosshair remains the Same Through ALL Magnifications!!
No Matter if it is a MRad or Moa scope.......
So if the small tick marks are .25 moa and the Major one is 1 moa.... This never changes throughout the zoom range of the scope..

For the a  2nd Focal Plane scope, it is a bit different.....
On the Zoom ring, have noticed one of the  magnification Numbers is a different color??? Usually Green in color...
Well the marking on the crosshairs are calibrated to be correct on this set magnification!!
No matter if it is an MRad or Moa scope......

Stuart

smithy123

Quote from: angrybear on June 23, 2022, 12:33:30 AM
Quote from: smithy123 on June 22, 2022, 09:30:37 PM

I know I said I was new to shooting but I didn't mean brand new like I've been shooting for a few years just on and off but never really got deep into it until now!

I know the basics to setting the right eye relief and height and show to get the scope to zero in at let's say 25 yards in the garden. I was just confused as to how my zero could move over night.

The poi DOES change with the magnification, because the poi is 1 mil dot of hold under when zoomed in all the way, but when I take the mag down to 6 the poi is half a mil dot of hold under!!

NO, that is the holdover dot value that's changing, which is different to the reticle POI.

Because with an SFP scope the ret stays the same size when you change zoom, so at lower mag 1 dot is a higher value than at high mag because the picture behind the ret is smaller at low mag.
ie at 3x 1 dot might be a rabbits head but zoom in to 16x 1 dot is only the rabbits eye.
This is why an SFP scope has a "true" magnification, that is the only mag where the dot is actually 1 MOA at 100yds or 1 MRAD at 100M.

With an FFP scope the ret size changes with the mag so 1 dot is the same value at every mag.

Until you understand the basics of how the scope works aim with the centre cross & forget holdover  ;)

Using the centre cross isn't going to get me anywhere in the field apart from a lot of missed rabbit I would only be able to take shots at the set zero range I wouldn't be to get closer or take them longer shots, how do I take a 70 yard shot whilst aiming on the centre hairs when zerod in for 50 yards.

And that's what I was ment to say the holdover dot value changes, I'll not get anywhere just sticking to the centre I have to learn at some point. What I don't understand is the working the clicks out and converting them, I keep it simple in my head I shoot the target and move the clickers accordingly, its worked fine for me

smithy123

This thread is getting out of hand now! My brain is overloaded with bits what everyone is throwing in, what I think I'm gunna do is take a step back and try learn it on my own because I need it broke down into simple terms, You lot are confusing the crap out of me🤨🤨

Squinty

simple.. you're getting lateral shift in point of impact with changing magnification and range.?

comes, goes- different every time?

that's  lens alignment error..damned good reason for a new scope

Smithy.. is this FAC?
you're talking 50-70yds.
One of the reasons why I couldn't get on with SFP mildots was because dots just didn't coincide with FAC trajectories.
Mils work for sub-12 to 50 but with FAC 50- 70yds there's only 1 dot drop @10x or guess work.

Shouldn't need to use the dots with a rangefinder.. zero cock-on at one range and remember the holdover for 55,60,65,70.. rabbits ear, half ear.
Worst case is you cut the throat every now and then and they flop around for a bit.
Only problem is hares.. bigger ears ;D


This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.