Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 10
  • Total: 10

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Power adjustment

Started by Craigash, June 12, 2022, 11:38:41 AM

Previous topic - Next topic

Craigash

Sorry if I am going over old ground but I am not quite sure what is going on with my rapid mk1 and the power adjustment. Please advise me.
I have removed the large threaded plug from the rear of the action. In there is a spring with a plastic guide with a one piece washer. Tall top hat looking. The spring sits on a small washer. Under that is a piece or round bar with 2 diameters and a small spring on the small diameter.  That sits inside the hammer. How do I drop the power? I have wound out the plug and it seems to have done the trick but other members have mentioned that it has an adjustment screw.

angrybear

#1
That "plug" is the adjustment screw cap  ;)


Craigash

Thankyou. And I have just discovered its an adjustable hammer. 👍

angrybear

A longer hammer pip lowers the power, as the hammer has less momentum when it strikes, iirc about 17mm is ideal sub 12

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.