Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 8
  • Total: 8

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Power adjustment

Started by Craigash, June 03, 2022, 04:33:31 PM

Previous topic - Next topic

Craigash

Hi everyone.  I just took my recent purchased rapid 7 mk1 to the range. Shoots spot on at 35. Fx mk2 chrono saying 13.7 with jsb 15.89
Is it a big job to drop the power to sub 12?

Aggy

Wind out the adjuster on the back of the hammer spring
Raw HM1000x fac .22
Skout Epoch .25 fac
Beretta 680

Ruger m77 mk2 .223
Many many many others been and gone

Craigash

Is that under the large stainless steel bung?

Ca_Varminter

Hammer Pre-Load Adjustment screw is located under the Bolt body...

Depending on the age of your rapid....
It may be under an "Anti-Tamper" plate!!!!!!

Good Luck,
Stuart

Kernal

What about the power curve on the mrk 1 without the reg that is,....would he not need to take this into account too.

:)
I'm an old-school programmer who started writing code back in the 1980s.

Please do not PM me unless you are an Admin or Moderator.

Craigash

That pic is exactly what it looks like.  It's 2002 model. But it looks like somebody has already been in there. The hex is a little chewed.

Aggy

Someone has been playing if it's chewed up ,it's a fairly chunky part easy to source one and replace it , get yourself a chrono
Raw HM1000x fac .22
Skout Epoch .25 fac
Beretta 680

Ruger m77 mk2 .223
Many many many others been and gone

Ca_Varminter

#7
Quote from: Kernal on June 03, 2022, 07:57:48 PM
What about the power curve on the mrk 1 without the reg that is,....would he not need to take this into account too.

:)
Hi Kernal.....No...
Since you boys live in the shadow of Under 12 ft-lbs.
And his guns is a little hot, so he needs to adjust the power DOWN!!
To my Understanding, the UK Law is "absolute"
So under NO circumstance may your Gun  shoot Above 12 ft-lbs
No matter where your gun is on it's Power-Curve......

Stuart

Craigash

Down is where I want it to go. I have removed the action from the stock until I get chance to do it. I have a fx mk2 crono to make sure all my air guns are legal.

KevG

with the mk1 if its standard and in good state of tune with 180 bar fill pressure it needs to be doing 10.8 ti 11 ftlbs. power will creep up to around 11.7 ftlbs on the sweet spot then back down some guns can differ regarding the fill pressure also some gauges can read slightly different  so fill pressure needs to be checked on each individual gun.
KevG
Like Like x 1 Winner Winner x 1 View List
Regards KevG.
Administrator

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.