Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 8
  • Total: 8
  • Baidu

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

O rings on exhaust valve tails

Started by nevadacowboy, March 18, 2022, 10:44:38 AM

Previous topic - Next topic

nevadacowboy

I recently purchased a new valve body and titanium stem from Ben Taylor of Theoben fame. On receipt of said valve I noticed there was no o ring on the valve body tail. I queried this with Ben and he told me that early rapids with the stainless steel valve had a countersink machined into the receiver to accept the valve tail o ring. Later models with the delrin valve body did not have the countersink and it was not required to fit an o ring.

Every valve body I have ever seen has had a o ring on the tail so it was a surprise to find out that the o ring is not required.

Some of the more knowledgeable members on here may already know this but I thought it was worth sharing.
Like Like x 1 View List
Bob
Once a Sapper always a Sapper

KevG

yes its correct what ben says about the older blocks,but same as you always known all valve bodies to have the tail oring.what I have found sometimes in rapids with out this oring can make a popping noise if this oring is not fitted.
KevG
Regards KevG.
Administrator

nevadacowboy

My reply from Ben.



Wow, that takes me back😂
They havnt had an O seal on that end since the old stainless valve, the delrin valve doesn't need one, if one is fitted the valve body will move up and down as it crushes the O seal as there is no place for it.
You Rapid is regulated I hope?
Bob
Once a Sapper always a Sapper

Ca_Varminter

Wow.....
That is the first I have heard of That!!
All my Export/FAC, and the one from Theoben USA
have a Countersunk area for the Tail O-ring!


Stuart

angrybear

I've just checked my spare MFR block & that's got the O ring recess,
I'm not going to open the others just to check, but the delrin valve with bronze filter removed from my 2010 FAC MK2 has an O ring fitted  :-\
Like Like x 1 View List

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.