Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 63
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 74
  • Total: 74
  • Google

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Regulator core set-up question MFR

Started by angrybear, December 26, 2021, 02:51:31 PM

Previous topic - Next topic

angrybear


When you screw the reg core in to the body how do you know when to stop ?

It has the "spacer" O ring but there's a full turn or more between contact  & unable to turn further.

I ask because I've just had to change the little bottle seal O ring on the pip & the core moved which has mucked up the power,
It's now only giving 5ftlb so obviously something is set-up wrong

KevG

as long as you have slight travel on the core its fine.you don't want more than 1mm travel though.besr way to check this is to remove nut and bellevilles
KevG
Like Like x 1 View List
Regards KevG.
Administrator

angrybear

Could you explain that a bit more Kev, I don't follow what travel you're on about  :-[
I thought it all went in 'snug' with only the compression of the spring washers by the air pressure to allow it to open.

KevG

the core should have travel.you should be able to push it in and out when nut and bellevilles are removed.if it had no travel at all you would get reg lock
KevG
Regards KevG.
Administrator

angrybear

Ok, I think I get it, 
So I'm obviously right at the point of reg lock because the slightest turn of the core changes the muzzle energy,
half a turn & the gun will not fire.
I assume that means I need to remove the nut & washers then screw in the core to get the fractional movement & re-fit/adjust the washers ?

angrybear

#5
Right job done,
just a fractional movement of the core shaft,
reassembled set to 100 bar (.20 cal)
Not creeping up & not leaking with bottle removed  :) :)
So I guess that's pretty much what it should be doing  8)

Thanks Kev, I now understand  ;)

reset as it was just a wee bit hot  :o
now giving a steady 677-685 fps over 3 mags, with FTT's
5 mags for the whole reset dropped the bottle from 200bar to 170bar so reasonably frugal with the air  ;D ;D

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.