Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 63
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 1
  • Guests: 27
  • Total: 28
  • lurk

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

MK1 power/consistency, bottle pressure

Started by Wolf, October 13, 2021, 06:05:15 PM

Previous topic - Next topic

Wolf

Stuck my Rapid 7 over the chrony this afternoon, bottle pressure roughly 120 bar, 12 shots with 5 to 7fps variation, at max 11.7 ftlb with accupells, to the best of my knowledge the gun isn't modified in any way, has no reg, just the short early bottle adaptor. Very pleased to say the least.

Filled the bottle to 160 bar roughly for a comparison of power curve, power dropped slightly as expected, and pellet speed down to high 577-585 ish, around the 10.7ftlb mark as rough guess, but still giving under 10 ft per sec spread between shots. 

Are they usually like that? :o

Squinty

Sounds quite low, usually the power curve  is on  the sweet spot around 180 bar.

I'd check again at 80-90 bar to see if the power continues to rise.

Often the problem is no power curve, starting high with a constant drop, tends to be a weak stem spring letting the air run free.

I'm throwing a couple of  gueses that either the spring is too stiff or maybe its fitted with a larger reg type valve which is shutting off too quickly with higher pressure from the fast-flow. Power rises as it gets closer to optimal pressure.
Like Like x 1 View List

Wolf

I'll give that a try and see what it does. :)

KevG

would also check valve body front port for size.needs to be 5mm
KevG
Agree Agree x 1 View List
Regards KevG.
Administrator

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.