Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 44
  • Total: 44
  • Google

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Oh! - rings

Started by Squinty, September 26, 2021, 12:06:26 PM

Previous topic - Next topic

Squinty

Fudge! Damned o-rings!
Went to the farm today to pellet test a new barrel on my mk1.
Put the a bottle on the gun before I left: the bb o-ring leaked ( little pop. big whoosh) , so I replaced it and topped up the bottle.
As the bottle had been on and off a reg tester.. no great surprise.
Taking no chances I opened a new packet of BS111s.. did that one and my other three bottles.

10 mile drive to the farm, 20 minutes chatting with the farmer.. and finally set up some 50yd targets at the back of the woods.
Set up the chrono...four shots confirmed what I roughly expected 900 with 18gr, 950 with 16s.

5 shots at the first target and the pellet dropped an inch.. then two..four. Out of air.
Confusing but I hadn't checked or topped up that one as it had been sealed with a cap. Doh!

Second bottle.... lost a bit of air screwing on and it sealed (Dr Bob valve pip has moved forward on the o-ring :o )
The farm hand drove up and I laid the Rapid on the back seat of the motor.
Another 20 minute chat later its back to shooting.

Half way through the second mag- the pellet misses the aim point on the bottom of the target... .empty again.??
Two bottles and all I've done is barely get the damned thing zeroed.
I'm already regretting not bringing the dive cylinder.

Third bottle.. instant o-ring fail, pop.. whoosh.
Opened the new bag of 111s and fitted another. . whoosh..
Quickly tried the fourth bottle.. yep..pop - whoosh.

Pack up, 10 mile drive home..passing several queues at petrol stations and noting that the shooting wagon only has around 25 miles left in the tank.

Get home.. top up 3x 480cc 1x 400cc ... dive cylinder down to 190bar :-\
Another two 15 mile round trips to the RFD next week as they don't fill 12L cylinders on the same day. .

Can't find the old bag of spare-spare BS111s  :(

Damn, rugger and blast.

PiL

You don't want luck like that very often. On the bright side, your be sorted for a good session next time out 👍👍

Squinty

I was a bit peeved ;D
Perfect conditions for testing and zeroing, chance of a few pigeons on the last bit of stubble  - let down by a bag of 10p parts.

I even tried the o-rings on my reg tester with a different fast-flow.....just wouldn't seal.


PiL


KCE

That aint good news at all.
Where did you get the o rings from so we can all avoid that in the future.

Regards Kev.
Regards KCE
Admin.

Squinty

Quote from: KCE on September 27, 2021, 02:43:37 PM
That aint good news at all.
Where did you get the o rings from so we can all avoid that in the future.

Regards Kev.

I bought them over 6 months ago so no saying if the same batch is even in stock.
Anyway purchased  from the same supplier that I've used for 5-6 years.
Everything else has been fine. valves, regs, f-f/valve cover.
Like Like x 1 View List

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.