Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 63
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 70
  • Total: 70

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Theoben Eliminator Collection Beeman Crow Magnum

Started by Kernal, September 04, 2021, 05:21:16 PM

Previous topic - Next topic

Kernal

was really hard for me to find information about eliminators I start the collection not to long ago and I finally have what I was dreaming for couple of years...from left to right here is the order of models 1 in the left thumbhole stock is the eliminator Mark I this one in particular was made in 1988 and is 177 cal ,,2 from left to right again is the beeman crow magnum Mark II in 20 cal this one in particular was made in 1992,,,3 beeman crow magnum Mark III this one in particular in 20 cal was made in 1999,,,4 beeman crow magnum Mark IV 22 cal this one in particular was made in 2002,,,and the mk v is one of the newer models before they stop selling them 22 cal and is a theoben eliminator with the vortek silencer...I know beeman crow magnum is same as Eliminator only diferent is they were imported by beeman...Just want to share this videos because I know that many people will appreciate..Thanks..Any question just ask..I'm no expert but if I can help you I will try it


Like Like x 3 View List

etiam viviens

Theoben mk2 .20         
Theoben mk2 .22       
Theoben mk2 .25
Raw HM1000x .25  2018  
Raw HM1000x .22  2013 
.35 barrel kit
.25 barrel kit
.30 barrel kit

DB.20

An impressive collection there Sir! Have you found these difficult to master, accuracy wise? I have seen a few comments saying the higher power rifles take some taming. Seems there's quite a few people can't get along with the sub 12ft/lb versions either. I've had a few sub 12 Theoben rammers and really liked the performance. Things of beauty and the handling suits me fine!

bengarzy

I made and used Eliminators for years, Rapids never did it for me and when I went out with both I always went back to the car for Eliminator.
There are two main reasons shooters can't get on with them....over pressurised is the first problem, you want to set up for the maximum velocity with the minimum pressure.
The second is you must shoot the rifle relaxed, don't hold it like a shot gun that will bite you if it's held too loosely. They also don't like to be shot (like most springers) from a rest or tripod like you can a PCP....... they will teach you to shoot free standing that's for sure, heavy and lively to shoot  but Terry Doe,  Tony Jefferson and myself shot 30 ft lb Rapids and Eliminators back to back at Bisley and at 100 yards the Eliminator beat the Rapid in .20, .22 and .25 purely because the violent pressure in the piston rifle punched the skirt of the pellet out into the rifling making it almost bullet shaped........ Terry and Dave Theobald put together an article about in AGW with pics of all the different  pellet shapes before and after firing in both types.
Like Like x 3 View List

Ca_Varminter

Quote from: bengarzy on February 12, 2022, 08:56:18 PM

The second is you must shoot the rifle relaxed, don't hold it like a shot gun that will bite you if it's held too loosely.
.........
Nice observation....
I always said a Gas-piston cannot be held "Loosey-Goosely"
They like a firm cheek weld.....
Practice makes Perfect...
My .20 Crow Magnum.... is still going strong.. I believe version 2
I wish it had the OEM  High check piece stock from Theoben, rather than the Ambidextrous stock...
Cheers
Stuart

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.