Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 63
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 46
  • Total: 46

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

MFR Bottle

Started by angrybear, August 26, 2021, 03:15:20 PM

Previous topic - Next topic

angrybear

So the build is almost there, just need a bottle & there lies the rub.
I was fully intending to splash out on a best fittings 300cc carbon because I happen to have an MFR valve to fit them,
But just realised they're too wide for the stock at 54mm (+/- 1.5mm)

So would anyone happen to know of a 50mm dia bottle with the M18 x 1.5 thread, before I go for a 280cc & new valve.
Like Like x 2 View List

nevadacowboy

I have a 380cc Dr Bob MFR bottle  with valve that I would be prepared to part with. £70 posted.  Valve would be removed for posting but would be included in package.
Bob
Once a Sapper always a Sapper

angrybear

PM'd you on the other forum,
I'm very interested if it will fit,
so if the dia is 50mm or less, yes please.
But if the dia is over 50mm, sadly it's not going to fit my stock.
Steve

KevG

the 380cc from Bob are same diameter as 280cc.have a couple on my mfr.
KevG
Regards KevG.
Administrator

angrybear

Thanks Kev,
I'd never heard of them before, but I've done the deal on it.

Considering that little more than a month ago I was perfectly happy & had no intention of ever needing to buy another Rapid,
It's coming along quite nicely  ;D ;D

KevG

yes those bottles came about because Bob got some bottle valves made and they did the wrong thread.so he found some bottles that were compatible.great idea and a nice size bottle.
KevG
Regards KevG.
Administrator

angrybear

Dry build, MFR block, 19" .22 barrel & 380cc bottle.
Looks better in the thumbhole stock than the sporter
Like Like x 2 View List

Kernal

Looks a real tidy gun that does m8, bet your very pleased with that, loving the green stock goes very well with the gun too.

8)

Kernal

Quote from: Kernal on September 01, 2021, 01:44:58 PM
Looks a real tidy gun that does m8, bet your very pleased with that, loving the green stock goes very well with the gun too.

8)

Just a quick question is the barrel blued or is it my eyes or maybe the photo ?

KevG

Regards KevG.
Administrator

angrybear

Quote from: Kernal on September 01, 2021, 01:46:09 PM
Quote from: Kernal on September 01, 2021, 01:44:58 PM
Looks a real tidy gun that does m8, bet your very pleased with that, loving the green stock goes very well with the gun too.

8)

Just a quick question is the barrel blued or is it my eyes or maybe the photo ?

Your eyes are fine,  :-[
the barrel came badly painted, it wiped off with thinners to reveal the blueing had been stripped, apart from where it get's clamped in the block  :o
I reblued it with "Perma blue" came up lovely but after 2-3 days had dry surface rust which when I wiped it down, left it looking a bit of a mess for the pic.

Having re-read the Perma blue instructions with a magnifying glass it says to finish with "Barricade" so I'll be re blueing it before the final build.

Kernal

Quote from: angrybear on September 01, 2021, 06:51:15 PM
Quote from: Kernal on September 01, 2021, 01:46:09 PM
Quote from: Kernal on September 01, 2021, 01:44:58 PM
Looks a real tidy gun that does m8, bet your very pleased with that, loving the green stock goes very well with the gun too.

8)

Just a quick question is the barrel blued or is it my eyes or maybe the photo ?

Your eyes are fine,  :-[
the barrel came badly painted, it wiped off with thinners to reveal the blueing had been stripped, apart from where it get's clamped in the block  :o
I reblued it with "Perma blue" came up lovely but after 2-3 days had dry surface rust which when I wiped it down, left it looking a bit of a mess for the pic.

Having re-read the Perma blue instructions with a magnifying glass it says to finish with "Barricade" so I'll be re blueing it before the final build.

We must know or have some bluing companies listed on here or even members can anyone give any pointers to help,


KevG

carbon sleeve is the easy cheap option to cover barrel to make it look tidy
KevG
Regards KevG.
Administrator

Kernal

But i`v it was me KevG i would want it blued to finish off the project ,...This is a Theoben mfr we are talking about here :D

KevG

nowt wrong with a sleeve m8.make them look better if you ask me
KevG
Regards KevG.
Administrator

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.