Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 40
  • Total: 40
  • Google (2)

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Re non firing

Started by Foxdropper, August 11, 2021, 06:51:24 PM

Previous topic - Next topic

Kernal

I would have liked this to be step by step, ?.... But i do understand your problem so maybe KevG will pm you and give you a step by step guide to fix the problem,

Good luck foxdropper,

Just would have like to see how this went on the forum open thread so other`s could have followed it and maybe just maybe if this happened to them,...well you know!

take care

I do hope you sort the problem out soon!

:)

Squinty

If you're undoing  the trigger adjuster (lefty-loosey) then thats going to increase the trigger pressure, perhaps to the point where it wont release.
Maybe the trigger shoe is stopping it from getting to the new break point?

Dodgy situation now...pellet/pellets up the spout and trigger jammed.
Ideally you need to apply the safety -lock the bolt back and clear the barrel.

errrr....its a three handed job to.....
hold bolt  in cocked but not locked back (down) position
screw in adjuster
and pull trigger.

without putting a hole in wall/ceiling /window

Like Like x 1 View List

Squinty

part 7 is the hammer, if that is still locked back after cycling the bolt and the bolt is no longer under tension from the hammer spring .....then the trigger sear doesn't appear to be disengaging.



Like Like x 1 View List

KCE

Thank you squinty much appreciated.

Regards kev.
Regards KCE
Admin.

KevG

the mk1 gamo can have alot of travel.if your brake point is far back the trigger shoe could be causing the problem like Stuart has already said
KevG
Regards KevG.
Administrator

Foxdropper

Quote from: Squinty on August 11, 2021, 09:19:24 PM
If you're undoing  the trigger adjuster (lefty-loosey) then thats going to increase the trigger pressure, perhaps to the point where it wont release.
Maybe the trigger shoe is stopping it from getting to the new break point?

Dodgy situation now...pellet/pellets up the spout and trigger jammed.
Ideally you need to apply the safety -lock the bolt back and clear the barrel.

errrr....its a three handed job to.....
hold bolt  in cocked but not locked back (down) position
screw in adjuster
and pull trigger.

without putting a hole in wall/ceiling /window
Squeaky bum time agreed mate .Something tells me it's a bit more in-depth than mere adjustment as it worked fine yesterday .

Foxdropper

#21
Quote from: KevG on August 11, 2021, 09:28:36 PM
the mk1 gamo can have alot of travel.if your brake point is far back the trigger shoe could be causing the problem like Stuart has already said
KevG
We have a winner 🤪😇😄😩😁😀🤭🤓🙄
Shoe off and now fires .How strange it fired perfect yesterday though .Should I be readjusting the screw back of trigger before using again .Back to where it was ?
Many thanks Kev and others .

KevG

those trigger shoes can move out of adjustment.thats what will have happend.the trigger can be moded to shorten first stage travel. you can adjust but not by much with the rear grub screw
KevG
Regards KevG.
Administrator

Foxdropper

So by tightening it clockwise to a point it will lengthen the pull before triggering is that right ?
Or will it lessen the crepe ?
Tomorrow's job anyway I'm off to bed ,early start .Many thanks lads ,thought I'd bought a right dead ender 🤣

Foxdropper

Next issue is the mags .Can they be refurbed or do I need new .On net theres 12 shot copies.Will they fit the mk 1 please ?

KevG

yes 12 shot mags will fit.but rapids being rapids you may need to adjust the barrel position slightly.
KevG
Regards KevG.
Administrator

Squinty

Quote from: Foxdropper on August 11, 2021, 09:44:34 PM
So by tightening it clockwise to a point it will lengthen the pull before triggering is that right ?
Or will it lessen the crepe ?
Tomorrow's job anyway I'm off to bed ,early start .Many thanks lads ,thought I'd bought a right dead ender 🤣

the theoben sporter instructions are a bit arse backwards, they state

Screw out for more
engagement using
a 1.5mm allen key
- ¼ turn at a time.

So screwing in gives less sear engagement .....a 'lighter trigger.' .basically shortens the last bit of the long pull.
Everything to that point is the spring
Like Like x 1 View List

Squinty



15 L...(fat trigger pin) is responsible for the long travel , its miles from the bottom sear 15 E(strut)

its a lightly modified £10 unit from the ilke of Gamo Hunter and other basic springers.
Like Like x 2 View List

Foxdropper

Thankyou all for the input chaps 👍🏻👍🏻

Kernal

Quote from: Foxdropper on August 12, 2021, 03:34:28 PM
Thankyou all for the input chaps 👍🏻👍🏻

Did it get sorted M8,

:)

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.