Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 63
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 46
  • Total: 46

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Cerakote finish on scopes?

Started by Rob, July 18, 2021, 04:32:18 PM

Previous topic - Next topic

Rob

I bumped the scope and stock recently. Thankfully there's no real damage done only a few light scuffs. I'm not bothered about the stock as that's an easy fix, but the marks on the scope are winding me up every time I look at them. I'm looking into getting it repaired and Cerakote was the first option that sprang to mind. I've had a read and and I've come to the conclusion that it's a bit of a dark art. I've read lots of conflicting advice regarding etching the surface if you are to stand any chance of the finish adhering as well as it should etc. However, it's recommended that scopes should be hand sanded to avoid damaging the scope. Some recommend or advise that the finish should be baked into the scope, being careful not to exceed 160 degrees for a specific amount of time. While others are dead against baking a finish onto a scope and insist that you use the 'C' type cerakote finish and allow it to air dry/cure. I've seen a video on YouTube where a cerakote finish is applied directly onto a scope with an anodised finish, but mine is scratched up (bare metal). I'm trying to find out if the scratches pose a problem when it comes to refinishing with Cerakote. I haven't phoned anyone to enquire yet as I'd like to understand more about the product and services before making any enquiries. Any advice or feedback would be much appreciated thanks

Rob

It's difficult to photograph and show the damage in detail. I would describe the marks as scuffs rather than deep scratches. I understand the Hawke Sidewinders tubes are made of a magnesium alloy, which got me wondering if that in itself is a problem..?

telbert

I bought a Marlin 917 recently that had been given the full Cerakote treatment. It looks great & definitely helps to keep it looking pretty.

Rob

That's good to hear thanks bud. I spoke to Riflecraft a few days ago and they were confident that the marks wouldn't be a problem. They said it shouldn't cost any extra to sort those out as they have to prep the surface anyway.
Like Like x 1 View List

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.