Welcome to Theoben Rapid Forum. Please login or sign up.

Members
  • Total Members: 1,077
  • Latest: Bodhi
Stats
  • Total Posts: 22,046
  • Total Topics: 3,199
  • Online today: 247
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 1
  • Guests: 10
  • Total: 11
  • maxtich

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Air leak - body damage?

Started by Sambo, June 20, 2021, 06:46:09 PM

Previous topic - Next topic

Sambo

Hi, looking for some guidance please.

Stripped and rebuilt my fac mk1 last night as it had an air leak, seemed mosty to be coming down the barrel from what I understand this is most likely a valve seal or bent valve..
I used the Jimmy dee guide and some other diagrams I found on the Internet and was pretty meticulous.
I checked the valve its all good, the seal on the black valve looked like it could do with replacing as it was slightly distorted so I put the leak down to that..
Excited and optimistic i charged it last night to find the leak was exactly the same!
Just cracked it open now to have a look,
and on close inspection there seems to be a very small chip inside the body where the black valve sits!! (See image) this has got to be the cause of the leak?
I recently fitted a new bottle and wonder if a tiny bit of swarf off the new threads got in there and scored the body?
If this is the problem can it be fixed?
Any help greatly appreciated!

Ca_Varminter

It looks like there is no major damage in your photo...
The valve-body area just needs a good cleaning...
If some of the crude or dried grease got in between the O-ring.
This can cause a leak down the barrel!

Good Luck,
Stuart

williamthedog

Why don't you put a complete new valve assembly in while you are there.

Sambo

Thanks for the quick replys and help!

I found a microscopic piece for thread from the grub screw tapping on the black valve, must have dropped in on assembly!
Anyhow, gave it another good clean and the grub screw tapping and re assembled..
Seemed airtight last night when I charged it. Have to check it hasn't drained over night to be sure, but seems good so far!

Thanks again for the guidance Stuart very much appreciated!

William, do you know where I can get the whole valve assembly new?

Cheers boys!

williamthedog

Like Like x 1 View List

williamthedog

I've just realised that he's on holiday at the moment.

Ca_Varminter

Here is one of my MK II Receivers...
I like to keep things clean... and Free Flowing!


Stuart
Like Like x 3 View List

williamthedog


This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.