Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 51
  • Total: 51

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Servicing a mk2

Started by williamthedog, June 19, 2021, 07:19:25 AM

Previous topic - Next topic

williamthedog

Just after a bit of advice,
When I service my mk2 do you think its worth changing the complete exhaust valve for a dr bobs one?
I changed it over when I done my mk1 a couple of months ago.
Is there anything else to do to it whilst I'm at it?
Cheers

skagitmonster

i would for peace of mind , nothing more infuriating if it fails and you have t strip the gun again

williamthedog

Very true, for the price of the valve its a no brainer really.

Ca_Varminter

You are on the right Path!
Since you have your MK II Stripped down...
Replace all O-rings..

Then If you want to do a little tuning...
A very slight Polish to the Hammer's bearing area's.
Also you can give a slight polish to the Bolt- Body also.. Makes the action smoother!

Just remember you are wanting a slight polish to these pieces!!
You don't want to remove so much metal, that the parts are Under-Sized!!

Good Luck,
Stuart

Squinty


Ca_Varminter

From and Engineer.....
"If it Ain't Broke........Improve It!!!"

Stuart

williamthedog

Don't really want to remove the hammer assembly at the moment. It still has the anti tamper plug fitted. If in the future I have to remove it I will polish the assembly. People have said polish the barrel, with what?
Sometime in the future maybe a polygon barrel.

williamthedog

Thats what I forgot to ask.
When I have to remove the anti tamper plug what do you replace it with.? Is it a screw in plug like the mk1?

Ca_Varminter

I love my.22 polygonal barrel on my Titanium Rapid!
But if your barrel is accurate.. you don't need to mess with it..
But if you have to, any good non-imbedding polish will do...

Since we don't hassle with Anti-Taper over on my side of the pond...
I can't help..
But Dr Bob or KevG should point you in the right direction!!

Good Luck,
Stuart

williamthedog

The accuracy isn't too bad. I've only been able to set up the scope in the back garden @30yards. It puts out half inch groups fairly consistently.

skagitmonster



i done this so many times now on lots of barrels works a treat i used a cordless drill but always go the same way as the rifling and use the finish paper until all the dirt is completely gone when fin it should be like glass if you look down it (other ways but i prefer this one )
Like Like x 1 View List

skagitmonster

get the 3m polishing paper from ebay
Like Like x 1 View List

williamthedog

Thanks for that. Never seen barrels being polished.
Was his lathe really on his lawn?  ;D

skagitmonster


williamthedog

Ah, so you have to drink a bottle of tequila at the same time. That'll be interesting  ;D

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.