Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 46
  • Total: 46

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Rapid zeroing problems

Started by nevadacowboy, April 17, 2021, 06:22:22 PM

Previous topic - Next topic

nevadacowboy

I fitted a new scope to my .177 rapid today and decided to use a set of half moon risers to give me a better head position. After fitting the scope i could not get it to zero at 30yds, I ran out of elevation.


To cut a long story short the problem was down to the scope risers, they were two different heights and I had another pair just like them in my spares box

If you have more than one set of scope risers make sure they are a matched pair and keep them together. It took me ages to find out what the problem was
Like Like x 1 Agree Agree x 1 View List
Bob
Once a Sapper always a Sapper

Tim_B

Two sets, how decadent :D

Interesting though, so thanks for sharing.
Like Like x 1 Useful Useful x 1 View List

Squinty

I'll remember that useful tip..... as I have two 'pairs' of 30mm half moons in the same bag.

KCE

Thank you for the heads up most appreciated.

Regards kev.
Regards KCE
Admin.

Fergie777

Put the thicker of the two on the rear mount, angles the scope down towards
the barrel, giving you more elevation adjustment.
Like Like x 3 Agree Agree x 1 View List

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.