Hi Guys,
I'm Bruce, new as a member but I have been here as a guest many times reading through posts for advice.
I have been shooting for years mainly hunting, but the last few years really getting into the maintenance side of my guns.
I'm currently dealing with a problem on my Rapid 7 fac mk.2 .22 rifle
Where or who can i ask for advice on fitting a quieter silencer than the standard, and a regulator for more consistant shots. Also a leak on the rifle and bottle. And any modifications that will be needed.
Any advice from someone who has possibly done the same would be appreciated.
Hi Bruce,
Glad you joined our Group of Rapid lovers here.
The Man in the know to talk to..Is
@KevGHe makes his own bits...
So He should be able to set You up with what you Need!
So if KevG doesn't show up... a very busy Rapid Doctor...
Make a post of what you need in is in the KevG Section...
https://rapidforum.co.uk/forum/index.php?board=60.0
Good Luck
Visit Us as Often as You Can
Stuart
Thank you stuart ,i will wait for mr KevG,then,regards Bruce.
Hi Bruce welcome to the forum,I'm sure kevG will sort you out . ATB jazz 😁
Welcome to the forum
Welcome M8 and enjoy the forum
Welcome aboard buddy.
Hi Bruce,
Well for the sake of a few £ I'd advise you to buy a seal kit from the bay of everything, & have a go at the leaks yourself to see how easy basic work is, "A1tackle" is the seller I use.
To find the leak I put the rifle in a bath & look for air bubbles, remove the stock, scope & mod first, & maybe tape over the muzzle, so it leaks from the breach if it's the valve.
Here's my MFR with a reg leak but also note bubbles at the bottom plug in front of the trigger, this takes a 1/4BSP Dowty washer not in the seal kits but is quite a common leak, Obviously they need a dry & relube post bath.
Hi angry bear i have been away so sorry for late reply got my self a seal kit :) .and found leak ,i believe the black plastic valve has some scraches on it so i have ordered a new one from Dr bob ,so waiting till it arrives,also ordered a new bottle as that was leaking as well ,so hopefully that will sort problems out,thank you again regards Bruce.
Welcome to the family mate
Quote from: Keiron on September 15, 2025, 05:28:36 PMWelcome to the family mate
Is it me or does this guy have a stutter around the forum LMAO ;D
Quote from: Kernal on September 18, 2025, 03:06:04 PMQuote from: Keiron on September 15, 2025, 05:28:36 PMWelcome to the family mate
Is it me or does this guy have a stutter around the forum LMAO ;D
You know what I think!
Lost track of it. Seemed to be welcoming himself to the forum after a bit!
Quote from: Kernal on September 18, 2025, 03:06:04 PMQuote from: Keiron on September 15, 2025, 05:28:36 PMWelcome to the family mate
Is it me or does this guy have a stutter around the forum LMAO ;D
. Hello kernel I don't really use the internet that much too buzy with life mate .. you can ask Kev about me if you need too he knows me very well mate 👍
Quote from: Brooksy on September 18, 2025, 07:58:25 PMQuote from: Kernal on September 18, 2025, 03:06:04 PMQuote from: Keiron on September 15, 2025, 05:28:36 PMWelcome to the family mate
Is it me or does this guy have a stutter around the forum LMAO ;D
You know what I think! Hello brooksy can you tell me what it is you think!! I'm a bit confused about all these comments about me
It's just what looks like blatant post-count building, simply by saying 'hello' on every single thread regardless of it's age.
A tactic often used by those who want quick access to a forums sales section, so it doesn't look good.
Treat it like "happy new year" after a week, you've missed the deadline. ;)
Doesn't matter.....
I made it so any Posts in this board don't add to your total Post Count!!
Stuart