Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,077
  • Total Topics: 3,204
  • Online today: 92
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Barrels

Started by smithy123, November 20, 2026, 11:18:42 PM

Previous topic - Next topic

smithy123

I'm going to purchase a lower Walter Barrel in 16mm diameter 615mm length choked standard rifling anyone had one of these fitted? What are your thoughts before I splash out £200 as I can't find a barrel anywhere
Like Like x 1 View List

Ca_Varminter

I was just about to PM you about your barrel question...
I was going to suggest Lother Walther(LW) barrel... they are made on your side of the pond...
Theoben used their Barrels for the .20 cals.... No Problems with mine!!
I also have a LW Polygonal barrel on my Titanium Rapid!!
Very accurate too at High Power(70fpe+)

Good Luck,
Stuart

Bodhi

Quote from: Ca_Varminter on <strong>Today</strong> at 04:50:59 AMI was just about to PM you about your barrel question...
I was going to suggest Lother Walther(LW) barrel... they are made on your side of the pond...
Theoben used their Barrels for the .20 cals.... No Problems with mine!!
I also have a LW Polygonal barrel on my Titanium Rapid!!
Very accurate too at High Power(70fpe+)

Good Luck,

Were all the .20 barrels from Walther and none anschutz?. I have a 1995 circ .20 cal
Stuart

angrybear

Putting the calibre might help  ;) but they aren't as common as they used to be.
Getting it machined is another matter.
Might be worth phoning around RFD's to see if anyone has broken a FAC model.

woogie_man

Besides LW what other barrels have people used for their rifles?

I was working a while back on an adapter that would allow people to use an Fx liner.  But sadly the one I made I buggered up and while it worked with the barrel, the probe didn't seal correctly.  So the concept worked, I was just not able to make another part.  And sadly I haven't been able to find anyone to make a correct sized part.

Would love to see some different options for barrels, especially for the FAC rifles and slugs.

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.