Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Is anyone making carbon shrouds?

Started by Robs5230, July 13, 2022, 08:18:16 AM

Previous topic - Next topic

Robs5230

Just wondered whether anyone was making back vented carbon shrouds, to suit a rapid with a 50mm dia bottle?
Thanks

Andycoup

Kevg maybe.
I know halinfax on the agf does.

Robs5230

Last time I chatted to Kev, he wasn't doing shrouds.
But thanks

KevG

just don't have the time to many irons in the fire,have you tryed chock Booth,he was making them quietest ive ever heard.he is not realy an Internet person though.
KevG
Regards KevG.
Administrator

Robs5230

Quote from: KevG on July 13, 2022, 07:07:51 PM
just don't have the time to many irons in the fire,have you tryed chock Booth,he was making them quietest ive ever heard.he is not realy an Internet person though.
KevG
Don't know him Kev.
Do you have any contact details you could let me have?
Cheers

nemo1966

Rapid MK2 Contour .22 BT Smoothtwist 19"
Rapid MK2 .20 19"
Rapid MK2 .25 19"
Rapid Impact GSX200 .22 BT Smoothtwist 19"

Ca_Varminter

The Reason for a Back vent and the Shroud .



You are making a Reflex/Volumetric type of moderator. This means you are using the full length of the Shroud
as a chamber of the moderator...
This make it a very effective..
So the vents is to allow More of the Volume of the blast to expand backwards.
You don't need them on powder-burners due to the Higher pressure of the muzzle blast!!

Stuart
Like Like x 1 View List

Aggy

Raw HM1000x fac .22
Skout Epoch .25 fac
Beretta 680

Ruger m77 mk2 .223
Many many many others been and gone

Ca_Varminter


nemo1966

Quote from: Ca_Varminter on September 15, 2022, 02:32:29 PM
The Reason for a Back vent and the Shroud .



You are making a Reflex/Volumetric type of moderator. This means you are using the full length of the Shroud
as a chamber of the moderator...
This make it a very effective..
So the vents is to allow More of the Volume of the blast to expand backwards.
You don't need them on powder-burners due to the Higher pressure of the muzzle blast!!

Stuart

I always found the holes useless, even on FAC models. The holes actually seem to make the moderators louder. I use the same design as Nutshot (he showed me how too make them many years ago).  A good sized mod will allow the air down the back end of the barrel and it compresses, then after the shot it quitely leaves through the muzzle end, I've found you don't need to dispell all the air, just take the sting out of the sound.

The Nutshot muzzle insert design is quite a bit different to yours. Yours looks very much like one of his very early attempts.



Rapid MK2 Contour .22 BT Smoothtwist 19"
Rapid MK2 .20 19"
Rapid MK2 .25 19"
Rapid Impact GSX200 .22 BT Smoothtwist 19"

Ca_Varminter

Everyone has their own Secret Sauce...
Using a short stack of K-baffles..
I hear slight change in tone and intensity...
I use small vent holes that are cross drilled to the ports you see on the rear extension

Stuart
Like Like x 1 View List

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.