Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 10
  • Total: 10
  • Baidu (2)

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Shocking groupings

Started by smithy123, June 15, 2022, 04:56:32 PM

Previous topic - Next topic

smithy123

Hi all, I've recently purchased a carbon fibre buddy bottle from best fittings with one of their valve onit, since putting it on the gun and taking it to the field I have been missing alot of rabbits!!!

My scopes are zeroed at 50 yards, so 25 yards is a mil dot above the centre cross with my set up, that was with the 400cc alloy bottle. As said before once putting the cf bottle on my zero is completely off and I cant seem to zero my scopes properly because I get alot of flyers.






KCE

One thing you can try is put back on the 400 bottle and see if you have same probs to start with.
If that is ok then there lies a prob with new bottle so can start to sort out from there.

Regards kev.
Disagree Disagree x 1 View List
Regards KCE
Admin.

KevG

#2
you have a carbon sleeve on the barrel plus a bottle clamp, chances are the clamp, is coming into contact with the barrel and sleeve
KevG
Regards KevG.
Administrator

smithy123

Hi Kev I didn't end up keeping the carbon shroud on the barrel because of that reason, I have a good 1.5/2mm clearance from the clamp to the barrel

angrybear

Just a process of elimination, so I'd also try moving the bottle clamp right back to the shoulder as far as it will go (which might change any resonance) then try without the mod, with the mod but without the bottle clamp, resting the bottle on a bag, then with the stock rested not the bottle, then with a different bottle etc

Ca_Varminter

Also keep in mind the Basics of Accuracy......
Barrel....Clean,Tight, and no unintentional pressure applied to it!
Scope ....Tight
Stock ....Tight
BTW.... KCE is right... If you have changed something, and your accuracy suffers....
Put things back as it once was, to see if the problem is eliminated....Just a process of elimination...

Good Luck,
Stuart

smithy123

Thanks people will take it all into consideration and have a play about will let you know what the results are

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.