Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 5
  • Total: 5
  • Baidu

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Rapid mk1, dec 1992

Started by smithy123, May 26, 2022, 11:06:03 AM

Previous topic - Next topic

jackrooz

no its down to restrictive flow of air ..not energising at the right time ..

some of the threads not matching that sort of thing

Squinty

personally..because  for some the BF valves are fine and others not.

a) the pip restricts airflow with fastflow on FAC
b) the threads on mine were crap, ok new v old thread but the pitch was just far enough out to grnd or bind up.
    Even after running a die over them,..rough as hell.
   
c) V2 pip dimensions with stainless 'tips's were awful and either activated in the wrong position or bottomed out on the spring/retainer whilst screwing the bottle on.
Unpressurised they screwed on...pressurised the bottle would bind up. Backing off the retainer and spring didn't help.
Never had a problem with the one on my Superten, even held air for 2 1/2 years.

I like Bob's valve bodies, no issues with the threads or sealing...but TBH the o-rings are a PITA,

In my humble opinion a PEEK pip would outlast delrin or o-ring seals...damned sight more expensive (now) but less complicated than steel tips and o-rings

smithy123

So the bottles themselves are fine? So all I need to do is replace the valve on the bf bottle and it will be all good again?

jackrooz

yes .. to be fair mate .. you can ask kev to turn you up a new pip that's wat I did and had no problems since ..


jackrooz

I should have a spare valve and pip should you require it

Squinty

The bottles are 100% just the valves can be hit and miss.

The new and old threads don't always marry up...I put the tightness  down to bedding in but wasn't long before the threads bound up.
Be careful when you screw it on, try it without air pressure first.,
I'd be cautious if it gets a bit graunchy 3/4 of the way down where the threads are subjected to pressure loading, that's where they can bind up.



jackrooz

exactly the same thing happend to me and mine.. bottle threads raunched up my reg threads so bad I had to have them re threaded  and basically became useless as it wouldn't accept anything else but that bottle


smithy123

Jack could I pm you and arrange for me to buy a valve and pip for the bottle as I don't really fancy putting it on if it's going to ruin the fast flow?

jackrooz

yea.of corse mate ill have a dig about this after noon

smithy123

Cheers jack, pm me if you manage to find it please and let me know what your wanting for it and how much postage is and I'll sort it out.

Thanks again👍

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.