Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 5
  • Total: 5
  • Baidu

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

You know when you start a job then wish you hadn’t

Started by Simonoxo, May 22, 2022, 05:59:13 PM

Previous topic - Next topic

Simonoxo


Ca_Varminter

Nothing to it...
I do this to all my Rapid every year...
Remember use only Molykote or silicone scuba grease on your O-rings!

Have Fun,
Stuart
Like Like x 1 View List

smithy123

Hi Stuart will ordinary silicone grease be okay, or bisley gun grease?

Thanks Brad

Ca_Varminter

Well Molykote, Scuba silicone, and Super-Lube grease are all non-flammable...
Safe to be used in High Pressure Air...
Not sure about "standard" silicone or bisley grease.
Just make sure there is no petroleum products used....
Can Lead to an unpleasant explosive event!

Stuart
Like Like x 1 View List

KCE

Hi Simonoxo

I have some molykote here you can have some for free it will last you for years.
I'm not far from you about 20 mins in car.

Regards kev.
Like Like x 1 Winner Winner x 1 View List
Regards KCE
Admin.

Simonoxo

Yeh I'm using bisley gun grease  :o should I not be!? 🙈 it's not back together yet I'm just waiting on few bits before I finish it off

Ca_Varminter

#6
Quote from: Simonoxo on May 25, 2022, 02:46:34 PM
Yeh I'm using bisley gun grease  :o should I not be!? 🙈
No.......


I had a member on the old AirgunAdvice site...
He was about using molybdenum grease in his stirrup pump.
I told him to stop, and use the recommended grease by Hill's!
His next post showed his pump brass adapter had "sheared off"...With a POP!!!
Well he reached a High enough temp and pressure for it to Diesel..

So clean off your Rapid receiver of any residue of the grease in any area in contact with High Pressure Air!

Stuart

KCE

That grease you are about to use is for springers not pcp air kits.
I worked on an HW77 some years ago that came to me it was dieseling very bad and had burnt the piston head almost away due to this grease.
Regards kev.
Regards KCE
Admin.

Simonoxo

All inners have been in white spirits I was just gonna use that to seat O rings 😅

Ca_Varminter

Quote from: KCE on May 25, 2022, 07:05:30 PM
That grease you are about to use is for springers not pcp air kits.
I worked on an HW77 some years ago that came to me it was dieseling very bad and had burnt the piston head almost away due to this grease.
Regards kev.
Hey Kev!
You still use molybdenum grease on the piston seal... But Very Sparingly!!
Rebuilding my HW80 and Theoben Gas Pistons rifles
I just used a slight smear behind the parachute seal lip!!
By the sounds of it, they shoveled it on!!

Cheers,
Stuart

KCE

Hi Stuart I agree just a tad and rub off is all that is needed,
This one was coated all the piston seal the piston and the main spring had so much on it was hard to see the coils.

Regards kev.
Regards KCE
Admin.

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.