Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 5
  • Total: 5
  • Baidu

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Trigger options?

Started by Simonoxo, April 22, 2022, 12:30:23 AM

Previous topic - Next topic

Simonoxo

Any recommendations on trigger upgraded over standard mk1 trigger I think mine has gamo one on not majorly bad but feels a little numb to what I'm used to on shotguns.

Ca_Varminter

KevG is your man...
He may be able to work a little of his Magic, a bit of polishing, and even a bearing..
Then there is also Dr Bob.
Dr Bob used make a replacement trigger lever..
Something like what Charlie DaTuna makes...
https://www.charliedatuna.com/

Good Luck
Stuart
Like Like x 1 View List

Simonoxo

Thanks Stuart
I'll have a look hard to explain how this one is it's just not as snappy as I'd like

Ca_Varminter

No need to explain.....
The stock Gamo trigger is Mushy!!!!!
I have Custom trigger on most my Rifles... Air and Powder.
There is nothing like a crispy breaking Two stage trigger...
Even though my Custom 22-250 has a single set, single stage trigger!!

This also the reason all my Rapid are MKII. The Mark4 trigger is almost Match trigger...

Stuart

Simonoxo

Awsome thanks for info. So would I be better off looking for a newer trigger assembly all together rather then just swapping out the trigger? Is that somthing I could do

Ca_Varminter

Well that is easier said than done!!
With the MKI you have don't have many options...
Trying to improve the existing Gamo trigger.
Try to find a working Gold Medal trigger Group.....Nearly impossible...

The last one is a longshot...
If you can find a good machinist/gunsmith.
You can machine your existing block to accept the Mark4 trigger!
I personally know the only gunsmith over on my side of the Pond that does this conversion on all Rapids!
My first Rapid a MKII with a sporter trigger, was the test subject for this conversion!
After this success, he spoke to Theoben about this. Soon after, they offered this Service!!!!!

Good Luck again...
Stuart

Simonoxo

I run a fanuc dahlih for a living 😊lots of odd ball parts daily something I can have a look at in future. Think I'll stick easy option on first see if it improves it any.
Thanks again Stuart your a wealth of knowledge 🍻

Squinty

A Gamo trigger can be improved however its a single stage unit- the long pull and heavy spring is a false 1st.

The pull weight is down to the trigger return spring, a simple 90* lever spring. That can be bent to reduce weight -trial and error.
Springs out of later generic units are mostly heavier, you can find stock lever springs at various suppliers..0.6-0.75mm wire but so far I haven't tried any.

The length of pull can be shortened by fitting a bush or RC micro-bearing on the trigger pin 15L
Once you lose the excess travel the trigger becomes much more positive and its easier to pull through rather than anticipating the break.

Besides that...a good polish up on all the sear faces and that's about it.
Like Like x 3 Funny Funny x 1 View List

KevG

I got some of the thinner section return spring made up and fited a few delrin bushes,along with a trigger shoe it can make the crapy gamo unit very nice
KevG
Like Like x 2 Winner Winner x 1 View List
Regards KevG.
Administrator

Simonoxo

Quote from: KevG on April 22, 2022, 05:41:29 PM
I got some of the thinner section return spring made up and fited a few delrin bushes,along with a trigger shoe it can make the crapy gamo unit very nice
KevG
Do you sell these if so I'd be interested payday Monday :-)

KevG

the bush is not something you can just send out as individual triggers can respond differently, it also depends on how much travel an individual trigger as some times you have to make a few bushes to get how you want it
KevG
Regards KevG.
Administrator

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.