Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 9
  • Total: 9
  • Baidu (2)

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Reg pressure?

Started by Rapid Dick, December 22, 2021, 04:05:05 PM

Previous topic - Next topic

Squinty

should be six washers on those and the one I had was close to bottoming out on the threads at 90 bar.

May be able to lift the stack with an M6 washer.. should be able to get 5 to the required pressure but fewer washers make it harder to set.
However the end float needs setting quite short 0.5 mm

Rapid Dick

Old Mk1 Rapid with tasteful updates,
And a couple of BSAs. 😜

alan1

There's various thickness in these disks are them disks thicker

KevG

normally they are 0.5 mm but some are 0.7mm
KevG
Regards KevG.
Administrator

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.