PP 700

[Daztilley]

They are known as the "budget leshiy" over in the states 😎😎

[Daztilley]

Well its arrived......😎😎😎

[Daztilley]

Looks like the regulator has been upgraded from the earlier pic - so it takes up less air space too 👍😎

[KCE]

The last part of the project Daz.
Not be long now till you are out in the field with it.
Regards Kev.

[Daztilley]

Looking forward to fitting it and getting it setup kev 👍
Could be getting an outing at the weekend too 👍😎

[KCE]

Nice to hear Daz.
I hope to get out this weekend and get some footage with the ATN 4k pro.
Regards Kev.

[Daztilley]

Look forward to seeing it kev 👍

Will get some pics on of the pp700 in action - hopefully 👍

[kennyboy]

After reading all of these posts I think I have found a new addition to my Christmas present list  At the moment I have an HW 45 with a HW shoulder stock but really fancy a recoil free pistol. Looking forwards to hearing how it shoots Daz. Ken.

[JoeB]

After reading all of these posts I think I have found a new addition to my Christmas present list  At the moment I have an HW 45 with a HW shoulder stock but really fancy a recoil free pistol. Looking forwards to hearing how it shoots Daz. Ken.

These guns really are good with a proper reg fitted.  I had a play the other day in my garage to check zero, and resting the gun it truely was amazing!  I fired 5 shots well inside a 5p grouping with 3 pretty much through the same hole to the point I initially thought I hadnt loaded a pellet and had to look really closely to see the overlap!  all with a cheap £8 red dot sight!

[Daztilley]

Yep they are really good 👍  managed to fit the huma reg and its been charged to 200bar - just need to set it up now....

[Robs5230]

Yep they are really good 👍  managed to fit the huma reg and its been charged to 200bar - just need to set it up now....

Any updates on this Daz?

Whats the power and shot count ?

I almost bought one with that stock a while ago. It would make a nice ratter for me

[Daztilley]

Looking to set it up at 11 ft/lb
Max fill pressure is 220 bar
Huma reg is set at 100 bar
The reg does take up space in the air tube ..... so I'm not sure about what the shot count will be - but im not worried about that as I've got a portable charging solution.
A 500cc buddy bottle filled to 250bar 👍

[Robs5230]

Looking to set it up at 11 ft/lb
Max fill pressure is 220 bar
Huma reg is set at 100 bar
The reg does take up space in the air tube ..... so I'm not sure about what the shot count will be - but im not worried about that as I've got a portable charging solution.
A 500cc buddy bottle filled to 250bar 👍

I was thinking of the exact same solution.
I'd be looking to whack a Yukon on one to use as a lightweight ratter.
I want a .177 one and wouldn't actually mind running it at sub6

Can you keep me updated on how you get on with it Daz? Your findings may encourage me to get one.
Sick of humping heavy rifles around at night and to be fair, I like single shot

Cheers Rob

[Daztilley]

Yes will update the thread with my findings....

Just weighed the setup as it is in the photo ..... 2.02Kg / 4.4 lb

[Daztilley]

Started the initial setup....

Accupell 14.3 gr
585 fps
10.8 ft / lb
Fill pressure 200 bar
Reg pressure 110 bar (indicated on gauge)

2 bar per shot = 45 shots (on reg)

The transfer port screw is 90% closed - so thinking of backing off the hammer spring and opening the transfer port to make it more efficient ....
But I am getting a small spike when it goes OFF REG - so its just a balancing act with the transfer port size and hammer spring......

But initially its looking good 👍