Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 57
  • Total: 57
  • Google

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

MFR Bottle

Started by angrybear, August 26, 2021, 03:15:20 PM

Previous topic - Next topic

angrybear

Oh bugger it leaks...everywhere  :-[

KevG

were are the leak points
KevG
Regards KevG.
Administrator

nevadacowboy

It wasn't leaking before I removed the valve for posting and I put a new O ring on the valve body prior to posting. There may be a small o ring inside the valve body that has moved.
Bob
Once a Sapper always a Sapper

angrybear

#18
Don't worry Bob the bottle itself is fine, that's about the only thing Not leaking  :o

Kev,
It probably just needs a complete re-seal, I was hoping the reg & adaptor I had were good without re-sealing them but obviously not,
the bottle seal on the push pin's leaking, as it the reg itself,
also 1 valve stem is way too loose, it was "popping" horribly with that one, the other stem is too tight, when I test fired it stuck open which I've never had before,
So I'll probably just get a new valve.
On top of that the pellet probe isn't sealing, I'd assumed it was .22 because it's 0.2mm thicker than the probe on my .20, but maybe not, (do you know the dia off hand?)
so looks like I'm going to do some more shopping at Dr Bob's, & might as well get an adjustable bolt at the same time  :-\

angrybear

I swear this sodding rifle must be jinxed  >:(

Done a complete O-ring change, fitted a Dr Bob adjustable bolt, & new valve except the valve locating grub-screw wouldn't fit, someone has changed the M3 for a 2BA, so I've had to modify that to fit, reassembled it all, hurray no leaks,

Test over the chrono it fired 2 shots around 670fps  :o then dropped to 270fps for the next 3  :'( , checked the bottle which was showing 100bar so filled it to 200bar
tested the reg & set it at 110bar (no psi on my cyl gauge) reassembled again, thought I might as well top off the bottle again, which showed reg testing had dropped it to 170bar,
so topped it off 200bar again opened the bleed & promptly dumped the contents because the bottle valve has now blown the seal  >:( >:(

The bear is not happy this evening.

KevG

if yours is the mfr reg with push pin disc  with locking grub screw it will leak with a quick fill. you need to seal the area behind the grub screw i normaly turn a very small piece of delrin down around 2mm diameter and around 1.5mm long.pop that in before grub screw then tighten down grub screw to expand delrin and make a seal
KevG
Regards KevG.
Administrator

angrybear

Sorry Kev,
no quick fill on mine, it's the actual bottle valve on the 380cc that's blown this time.
Dumb Dumb x 1 View List

KevG

sorry m8 got my wires crossed
KevG
Regards KevG.
Administrator

angrybear

New seal inside the bottle valve, job done  :D
Like Like x 1 View List

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.