Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 30
  • Total: 30
  • Google

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Quick fill/pressure gauge

Started by telbert, August 15, 2021, 07:11:44 PM

Previous topic - Next topic

telbert

Hi all, i have an FAC MK2 rapid and was wondering what the options are for fitting a pressure gauge  to take the guess work out of re filling. Cost, ease of fitting , any mods to the stock required etc. Do i get a quick fill kit with an integrated gauge ? Any info on this would be  most welcome.

Squinty

Few options for a mk2 fac, as they are usually fastlow you can go basic and have a suitable fitting straight into the blocks bottom blanking plug.
Just needs a hole in the bottom of the stock. Use the gauge on your dive cylinder, easy to check before you go out and count your shots.
I ran a full shot string over the chrono and I get 42 consistent shots x400cc, 55 x480cc from my mk1. , 3x14 shot mags (+ 1x12)

And you can tstill ake the bottle off without needing a full drain.

You could simply fit a gauge into the same hole...but  imo the only advantage is that it's a leak indicator...or alternatively something to leak.

Dr Bobs. 180.  one 24mm hole in bottom of the stock as the gauge is directly under the barrel.
Got one myself, but not in use, gutted to put a hole in old stock...raggedy and cracked as it was.
No faults in operation but the extra flow meant a little re-tune was required and if anything the power curve was at a slightly lower pressure.
Only niggle is not being able to remove the bottle, it's a damned sight easier to carry a spare buddy bottle than lug a 12l cylinder in and out of the motor.

Bobs 'V' or 90 degree, needs slots cut on both sides of the stock or on side and bottom ?

Best fittings ...meh. Long, fugly and moves the weight forward but no stock modifications

Harder to find Theoben/Impact/RAW quick fills, 110 degree? 'V' type. Need stock mods but at least the bottle is still removable.
Occasionally come up second hand , RAW have been out of stock for yonks and pre-order with no lead time.
$150 fastflow to $225 regged..lord only knows what they will cost from a UK supplier.

I've read some reports of leaks and odd size o-rings. Also led to believe that Airforce have changed the thread on the new guns?

KevG

yes they have changed the threads.i would sooner carry a spare bottle.
KevG
Regards KevG.
Administrator

angrybear

#3
I've got a RAW 180 degree fast flow, looks very well made,
I might even get round to fitting it, but I'm in no hurry to drill the stock  :-\

I suppose I could trial fit it & run it over the chrono without a stock to see if it effects the power/shot count.

I've also got one of unknown make that's just a Theoben bottle adaptor with a gauge & QF drilled in to it at 90 degrees,
Problem is the fixed drillings  ??? it doesn't line up correctly with my block.


Squinty

shouldn't be an issue with the RAW quick fill as it retains the bottle valve.
As I have found out.. you can have too much airflow.
In part I was trying to squeeze a bit more out of my mk1..... up from 34-35 to 38-40ish but with all the mods combined with fully unrestricted air... umm 48 :o

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.