Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 11
  • Total: 11
  • Baidu (2)

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Suitable moderators

Started by Bumpkin, January 04, 2021, 06:32:42 PM

Previous topic - Next topic

Bumpkin

Hi,
A bit of help please if anybody can. I recently bought a late model Rapid Mk1 with the barrel threaded 1/2 unf. It didn't come with a silencer so I am trying to locate a Theoben one for it. Am I right to think that the slip over models will fit as well as the threaded ones?
Thanks in advance
Bumpkin

KevG

you may find the holding grub screw will fall onto were the barrel shoulder is towards the thread.
KevG
Regards KevG.
Administrator

Bumpkin

Thank you KevG. I guess that means a slide over should work but the grub screw will potentially spoil the thread.  I'll have to be careful - don't want to put another make of silencer on it - just like the shape/ lines of the Theoben - and the idea of it all being original manufacture.
Thanks again.

Squinty

One issue that comes to mind....usually ? the slip-ons use the o/d at the crown to locate centre, being 1/2" and not 15.75mm there may be some play which could push the alignment out. Might end up clipping.

TBH a HW would be lighter and quieter.

Gudge

I guess at a push you could have a sleeve turned up with the 1/2" UNF internal thread and the same outer diameter as the barrel. Just a thought.

Squinty

could possibly use a thread protector but it might need turning down a few thou and centering.


KevG

I would check were the grub screw falls.it may just clear thread if its a short thread run.other wise like already said fit a threaded sleeve just slightly over sized diameter then turn down to barrel diameter
KevG
Regards KevG.
Administrator

Bumpkin

Thanks all.  I didn't know beforehand about the thread protector.  It turns out that one has turned up which comes with a threaded sleeve so fingers crossed it will all work fine.  I hope!

Bumpkin

PS I agree re the HW or similar silencer being a better/ simpler option.  My only reason for wanting to fit a Theoben was for originality and the sleek lines that they have. 
Bumpkin

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.