Welcome to Theoben Rapid Forum. Please login or sign up.

Members
Stats
  • Total Posts: 22,074
  • Total Topics: 3,204
  • Online today: 23
  • Online ever: 1,511 (July 25, 2026, 07:29:23 PM)
Users Online
  • Users: 0
  • Guests: 7
  • Total: 7
  • Baidu

Twitter YouTube Facebook

Theoben Rapid Forum

Click above to make a donation. Thank you for supporting The Theoben Rapid Forum.

Powder coating my barrel

Started by Kernal, November 17, 2020, 08:05:15 PM

Previous topic - Next topic

Kernal

I`ve been thinking about having my barrel powder coated, any idea`s anyone if this is even possible to have done?

If so whats the best method to do this or would it be possible to have this done professionally.

:)

Ca_Varminter

Baked on Cerakote is the way to Go!
Way more Durable, and solvent resistant..

Stuart

Kernal

Quote from: Ca_Varminter on November 17, 2020, 11:48:14 PM
Baked on Cerakote is the way to Go!
Way more Durable, and solvent resistant..

Stuart

Where do i get this done any idea`s, and what do you think it would look like on my rapid barrel, also does anyone do this or has thought of doing this to rid yourself of the bluing on your barrel.

:)

Daztilley

Cheap / easy / renewable ....

Gorilla grip camo tape 👍
Regards Daztilley
Moderator

Dr Bob


Yes I've had one powder coated. I put it in with a batch of bottle clamps. Good result just make sure the crown, rifling and part that fits into the block are masked of first as it's quite thick stuff.

Bob


Personal Order`s & Questions Phone 07970714772

To place an order,

Please contact me on my personal e-mail address on this site or ask questions in my dedicated forum,

Thankyou

Dr.Bob,

Kernal

Quote from: Dr Bob on November 18, 2020, 10:42:28 AM

Yes I've had one powder coated. I put it in with a batch of bottle clamps. Good result just make sure the crown, rifling and part that fits into the block are masked of first as it's quite thick stuff.

Bob

Any pointers as to where to send my barrel too,...So i can get this job done! , also how much to mask off so they don`t powder coat the piece that goes into the block or silencer.

:)

Ca_Varminter

Quote from: Kernal on November 18, 2020, 09:24:40 AM

Where do i get this done any idea`s, and what do you think it would look like on my rapid barrel, also does anyone do this or has thought of doing this to rid yourself of the bluing on your barrel.

:)

Usually any metal finishing Fabrication should have offer service...
Google "Cerakote Service"
Also gun refinishing service...
Also take a look on Youtube.. for description and durability examples!!


Stuart

dyker2010

or get it polished and hot blued from shaun at isp air rifles£50 last time i got it done first class job and service hth

anthony

Rapid 7 Mk2 FAC 30ftps + Tasco 3-9x50 AG + Kevg Mod
Rapid 7 Mk1 + NV008 LRF + Nutshot Mod
Ruger 10-22 + Tasco 3-9x50 AG Scope + Gen3 PVS14
CZ 17 HMR + Iray Rico RL42 Thermal Scope
Howa 1500 Short Action 223 + T-Pro 55-6-12 Thermal Scope

Kernal

Well thanks guy`s now i have quite a few options to choose from, But as for bluing well there is nothing wrong with the bluing on the barrel already so i think thats a no no,
But powder coating or Cerakote is probably the road i may choose as i`m in two minds if i want to fit the carbon tube as yet! , but that is now an option as well but until i make up my mind regarding the carbon tube i`ll just leave it in the box for now.

;)

Ca_Varminter

OMG!!!
You are worried about your barrel you are covering with a Carbon fiber tube!!!!
Jeez, just wipe down REAL good with Oil or Grease!!

But a better solution, I use on my Precision Machinist tools.. Hard Wax!!!
No Rust Anywhere!!!!
Just give your barrel Several coats, wipe it down between coats..
Cover and Forget it!!

BTW this what I do for all my Shrouded Barrels!!!!!!!!
Even the unfinished LW polygonal barrel on my Titanium Rapid!!!

Stuart

Kernal

Well if i was honest Stuart,

I don`t think there is enough coverage between the barrel & bottle when the Carbon fiber tube is fitted,...But that was a tomorrow job as i`m going to take some photo`s and show everyone just how much clearance i get when i have my bottle and DrBob clamp on the gun,

I may have to lose the buddy bottle camo cover i had on the bottle years as that could give me a mill or two maybe,...Anyway lets see what tomorrow bring when i take clear photos to show everyone just how much space i have to play with.

:)


Ca_Varminter

The clearance should be that close!!
Dr Bob and I research his design.. so it would fit my Shrouded Barrel without touching the Shroud!


Here is the clearance you should have...
This is a stock photo from Dr Bob's V-style QF.....


Stuart

Kernal

I have the regulator fitted to my rapid by KevG and i`m sure when i looked at the clearance today when i was out shooting with my rapid  the bottle was really close to the barrel which in my opinion could create a problem.

I think what i need to do is take photo`s to show you just how much clearance i have before i think about fitting the carbon tube.

:)

Kernal

Quote from: Kernal on November 19, 2020, 08:03:37 PM
I have the regulator fitted to my rapid by KevG and i`m sure when i looked at the clearance today when i was out shooting with my rapid  the bottle was really close to the barrel which in my opinion could create a problem.

I think what i need to do is take photo`s to show you just how much clearance i have before i think about fitting the carbon tube.

:)

Ok i`ll take these photos now so lets get the popcorn out and get ready for the next post to show you clearance between my buddy bottle and the barrel.

:)

This website is proudly hosted on Crocweb Cloud Website Hosting.

Crocweb Cloud Website Hosting

Welcome to the Theoben Rapid Forum

© 2026 Theoben Rapid Forum. All rights reserved.