All my Rapid Technical Posts.

[Ca_Varminter]

This is a Sticky Post of the list of all my technical Post I have done here.....

1. A photo spread of all the main triggers used in the Rapid MK I and MK II
https://rapidforum.co.uk/forum/index.php?topic=83.0


2. The Rapid Adjustable Bolt Disassembly.
https://rapidforum.co.uk/forum/index.php?topic=238.0


3. Rapid MK II Sporter trigger adjustment(tear-drop safety knob)
https://rapidforum.co.uk/forum/index.php?topic=275.0


4. Rapid MK II Mark4 trigger adjustment
https://rapidforum.co.uk/forum/index.php?topic=272.0


5. How to Disassemble and Adjust your 12-shot Mag (OEM or Dr Bob's)
https://rapidforum.co.uk/forum/index.php?topic=237.0


6. How to remove and re-install your Rapid MK II Barrel
https://rapidforum.co.uk/forum/index.php?topic=408.0


7. How I installed RAW and Dr Bob's Quick-Fills
https://rapidforum.co.uk/forum/index.php?topic=185.0


8. Destructive Titanium Airtube Testing (by Chip Smith)
https://rapidforum.co.uk/forum/index.php?topic=204.0


9. How  to Lap your Outer Probe to Seal Properly to your Barrel
https://rapidforum.co.uk/forum/index.php?topic=935.0

10. Video of the Comparison of KevG DoubleTap Inertia Weight Design with the Theoben Inertia weight
https://rapidforum.co.uk/forum/index.php?topic=1111.0

11. How to make Your Own Pellets...Swaging Slugs! with videos...
https://rapidforum.co.uk/forum/index.php?topic=1740.0

12. Tool to help installing the Tail O-ring on a Valve-Body
https://rapidforum.co.uk/forum/index.php?topic=1973.0

13.How to Smooth out Your Bolt Lock-Up!
     https://rapidforum.co.uk/forum/index.php?topic=1192.0

Hope this help All the Rapid lovers here!
Stuart

[GB2017]

Very helpful thanks

Now can you do one on how to teach my pellets not to socially distance, mine seem to be all scared of catching covid 

[kjc]

Thanks very much, will come in handy when I get my MFR.

[jps]

Thank you for putting up your technical posts, very helpful indeed. 

[Daztilley]

Great info Stuart 👍

[Vard]

Thanks for sharing.
Have got to drill a stock to suit a dr Bob quick fill .Am using your ideas in tech thread as a basis/inspiration to make my own fixture to secure stock to whilst I do it.
Cheers.

[Ca_Varminter]

Hi Vard,
Glad My Tech Post helped!!
You need to post some photos of The results of your Quest
for the Perfect QF hole in your Rapid Stock!!

Good Luck,
Stuart

[KevG]

nice one stuart
KevG

[steve1705]

Great info and the double tap thingy is definately an eye opener, is it for sub 12 only or would an FAC benifit from it.

[Ca_Varminter]

All Rapid will benefit from One of KevG's Double Tap Inertia Weight..
Even my 70 fpe Ul_Ti_Mate Rapid loves it ...

Stuart