HUMA Reg for the Rapids

[DRT.1]

Anyone fitted one? I understand it has a little extra inbuilt plenum capacity?? If so anyone know how much?? Im considering one for my FAC early MK1

[Squinty]

no dea of exact gain but as you have probably seen they are at least flush with the threads.
And of course it requires a 'v' block or sleeve to fit.

Would also need suitable block porting.

[Ca_Varminter]

`No it doesn't add to plenum volume...
Also it is made for the MK II...
So you may need to port your Rapid to have it work correctly
Also the body is made so you have to used a RAW QF setup


Stuart

[etiam viviens]

Compared to the Raw/Theoben regulator it gains a few cc as the regulator of the Huma is in the housing

[Ca_Varminter]

Since there is no Core extending into the Pre-Chamber... a couple CC..
Just like KevG short Reg Cores!!

Stuart